We’ve just updated our Unified 2 firmware to version 2.60b. Unless this release addresses a bug on your machine and/or board or there is a feature you want that was added (if any) you do not need to update. If you are using our EZBoard with the EZFirmware site this firmware update will be on the EZFirmware site as well for immediate use.

Download from our Unified 2 website at UF2.TH3DStudio.com

Release Notes:


  • Fix Chiron Bed not Heating
  • Fix pin change from 2.1.2 Marlin Update

4 thoughts on “Unified 2.60b is now live! | Firmware Update

  1. thomas.boelsch says:

    Hello from Germany,

    I have a creality CR10 V3

    The unified 2.53 works fine.

    Manual mesh bed leveling is perfect.

    But 2.60 2.60a and 2.60b the manual mesh bed leveling make problems.

    The steppers run too fast, so they makes a dangerous noise.

    The bed is 30 x 30 cm, but it only runs 20 x 20.

    I hope my English is good enough.

    Nice Day


    • Tim Hoogland says:

      Sounds like you flashed with the wrong printer model uncommented. I reviewed the code and the CR10_V3 option is setting the correct bed size and other settings. This is also indicated by the faster movement speeds as well. The firmware sets max speeds based on bed sizes.

  2. thomas.boelsch says:

    hi Tim,
    no, all correctly. all versions before over one year i used are top.
    // ***************** CREALITY PRINTERS 2560 CPU BOARD *******************
    //#define CR10S
    //#define CR10S_MINI
    //#define CR10S_S4
    //#define CR10S_S5
    //#define CR10_V2
    #define CR10_V3
    //#define CR10S_PRO //V1 Model came with an 18mm probe pre-installed
    //#define CR10S_PRO_V2 //V2 Model came with a BLTouch pre-installed
    //#define CR20
    //#define CRX
    //#define ENDER4
    //#define ENDER5_PLUS

Comments are closed.