Click here to see the video on Youtube: EZBoard DIY Firmware for Any Printer – Ender 6 Question – Ask Tim Clip – 3/22/23
- Store
- Filament
- PLA FilamentsPLA is a biodegradable, renewable plastic that is easy to print and affordable.
- PETG FilamentsPETG is an alternative to ABS for those who do not have an enclosure to print in. PETG filaments have excellent layer adhesion and handle heat up to 70-80C for higher ambient temperatures.
- ABS FilamentsABS is a very strong plastic with high-temperature resistance (100C+). ABS should be printed inside an enclosure to ensure part strength and reduce warping.
- Nylon FilamentsNylon is a very STRONG filament where durability and layer adhesion is needed. These filaments are typically able to be printed without an enclosure and need a high nozzle temp of 230-250C and bed temp up to 80C. These are more expensive than PLA or ABS but their strength is unmatched.
- Merch
- News
- Unified 2 Firmware
- Help Center
- Contact Us
- Tools
Videos
EZBoard DIY Firmware for Any Printer – Ender 6 Question – Ask Tim Clip – 3/22/23
Posted on by Tim Hoogland