JGMaker Magic Firmware | V1.1 Board

Do you have a JGMaker Magic and want a stable firmware with the latest features? Maybe you’re adding our EZABL kit to the machine. This is the download for you. Directions are below. Download We also recommend you download the Unified 2 STL pack as well. This contains EZABL mounts, Gantry leveling Blocks, Solid bed mounts, and […]

EZABL Pro™: M119 End-stop Test

What is the M119 command? Marlin’s M119 command is called “End-stop States”. This reports the current status of each end-stop switch (and filament sensor, if present) at the time it is run. The data is retrieved by the printer and output to a terminal connected to the printer. The data typically looks like the following: […]

EZABL Pro™ FAQs

EZABL Pro™ Hardware and Accessories FAQs Which size sensor do I choose? We have three sizes of EZABL Pro™ available; the standard 18mm sensor, the 12mm “Mini” sensor, and the 8mm “Micro” sensor. These three operate the same way in terms of installation, function, and usage. There are only two somewhat-significant differences between the sensors, […]

EZBoard V2 – Installation Guide

Getting Started Welcome to the TH3D EZBoard V2 Documentation! Almost everything is plug-and-play. Make sure to unplug your printer from the wall before installing this or any other parts on your printer. We will cover the connections on the board and then go over adding things like filament sensors, EZABL, and BL Touch, all optional […]