Slicer Preview About this Mount This is the same mount used in our video on the Ender 6. This works with our EZABL kit and our 5015 24V fan for much better than stock cooling. Print with support from build platform only as shown above. We recommend printing this in ABS as well. If you […]
Do you have a JGMaker Magic and want a stable firmware with the latest features? Maybe you’re adding our EZABL kit to the machine. This is the download for you. Directions are below. Download We also recommend you download the Unified 2 STL pack as well. This contains EZABL mounts, Gantry leveling Blocks, Solid bed mounts, and […]
Board Limitations Note: Due to the design of the Voxelab boards with TMC drivers Linear Advance will probably not work correctly. The feature is available but use at your own risk. Maybe you’re adding our EZABL kit to the machine. This is the download for you. You will need to update the LCD and Board firmware for this […]
While upgrading our S1 we wanted to move to a 5015 fan duct. The STL that was provided by TX_Ryan was not properly exported or rotated to the print orientation. We fixed the file and rotated it. Print in ABS or PETG minimum. PLA is not recommended.