Extruder Motor will not Turn

Cold Extrusion Prevention If you are having issues with your extruder motor not turning when you tell it to extrude or retract, you may be having a safety feature in Marlin and our Unified firmware preventing it. The firmware is setup to not let the extruder motor turn until the hotend is at 170C or […]

EZBoard – FAQ

Does the EZBoard Need Heatsinks on the Drivers? No. Because we properly design our boards unlike the Chinese. They do not need heatsinks and TMC specifically states that there are to be NO heatsinks on their drivers since they sink heat through the PCB. Our board is 4 layers with 2oz copper on EVERY layer. […]