EZOut Filament Sensor Kit – Installation Information

Getting Started You will need the following to install the kit: The TH3D EZOut V2 Kit If you have the Standard (SKR/MKS/Tornado/CR-10S)/Wanhao D6 a heat gun or hair dryer to install the heat shrink on the adapter PCB after making the connections Tools to open your control box PC To Flash the Firmware Unified 2 […]

COEX Filaments – Recommended Nozzle and Bed Temperatures

Recommended Nozzle Temperatures: COEX PLA and PLA Prime: 215°-235° C COEX ABS and ABS Prime: 230°-250° C COEX PETG: 230°-245° C Recommended Bed Adhesion Information and Temperatures: PLA and PLA Prime: 0°-60° C Painter’s tape is recommended for unheated beds, adhesive is optional at the user’s discretion. Heated bed temperature recommendation is 60° C. Works […]