Getting Started Welcome to the TH3D EZBoard Documentation! Almost everything is plug-and-play. Make sure to unplug your printer from the wall before installing this or any other parts on your printer. We will cover the connections on the board and then go over adding things like filament sensors, EZABL, BL Touch, and the E3D PT100 […]
What you will need The EZNeo Strip A 5V Power Adapter* Jumper Wires Soldering Iron & Solder *The V4.X.X Boards have a 5V output on the BL_T header but we do not recommend using that to power the EZNeo as we do not want to overload the 5V rail on these boards. It is recommended […]
What you will need The EZNeo Strip A 5V Power Adapter Jumper Wires Soldering Iron & Solder IO Pin Wiring The V2.5.2 boards have 5 IO pins that are available to use. You can use any of these to control the EZNeo strips. Below is a picture showing the pin locations and their corresponding pin […]
What you will need The EZNeo Strip 5V Rail Warning – The SKR E3 Mini 1.2 and 2.0 boards say they support a 3A output from their onboard voltage regulator. They are also known to be unstable on some boards. If you have issues with the EZNeos flickering you can bypass their onboard regulator and […]