Ender 3 S1 5015 Fan Duct STL

While upgrading our S1 we wanted to move to a 5015 fan duct. The STL that was provided by TX_Ryan was not properly exported or rotated to the print orientation. We fixed the file and rotated it. Print in ABS or PETG minimum. PLA is not recommended.

COEX Filaments – Recommended Nozzle and Bed Temperatures

Recommended Nozzle Temperatures: COEX PLA and PLA Prime: 215°-235° C COEX ABS and ABS Prime: 230°-250° C COEX PETG: 230°-245° C Recommended Bed Adhesion Information and Temperatures: PLA and PLA Prime: 0°-60° C Painter’s tape is recommended for unheated beds, adhesive is optional at the user’s discretion. Heated bed temperature recommendation is 60° C. Works […]