This information is provided for people wishing to use 3rd party firmware on the EZBoard V2. This information is provided as-is with no guarantees or warranty. Do so at your own risk. If you brick your board by trying to load 3rd party firmware (aka not our Unified 2 Firmware) then it is on you […]
Fixing a Bad Bootloader If for some reason you got a bad flash on your 2560-based board, you can always bail yourself out by re-flashing the bootloader with an Arduino Uno kit and then uploading the firmware. To do this, follow our bootloader flashing guide but instead of selecting the “Sanguino 1248p” for the board, […]
Board Connections These board connections apply to the V1.1.2/V1.1.3/V1.1.4 Creality Board Versions.
Board Connections Detailed Pin Diagram
For 8 Bit Boards ONLY The bootloader information here is only to flash the bootloader. This is only for the 1284p boards. If you have a 32 bit board they already have bootloaders on them. Do NOT try to load a bootloader with this guide or our hardware if you have a 32 bit board. […]
- 1
- 2