Our friend over at Teaching Tech made a great video about adding grounding to your 3D printer. Those with AC beds definitely should have this and ones with DC beds will benefit from it if you are getting odd issues with your ABL sensor. Starting at 3:41 this is a great example of checking the grounding on […]
Intro This was an internal project that we are sharing for everyone to do if they have the skill to do so. This information is provided as-is with no warranty or support from TH3D. Do this at your own risk. If you want to add a heated bed to your Mega Zero you can do […]
See below for a wiring output from the CR-10 Power Supply. We recommend getting power from here. This is also applicable for MOST 12V/24V power supplies with the same connections. This is a 12V 30A PSU shown below. 24V PSUs are the same layout typically. Most PSUs have the 12/24V output labeled with V+ and […]
Voltage Selection Switch Since we ship internationally all our Power Supplies sold (internal ones for printer power supply) ship with the voltage switch set in the 230V position. This is done to prevent damage to the power supply. If we ship a power supply to a country or customer that is on 230V power and […]