Most Creality Printers use a FTDI F232R USB to Serial adapter chip for them to use USB. If you have a V1.1.4 board you will want to use the CH340 Driver instead. If you are having issues communicating with your board try installing one of the drivers below. Windows Driver FTDI F232R Windows Driver How to manually install Windows […]
DISCLAIMER Before we start we want to note that during testing to get this LCD working with the EZBoard we had one instance where the BTT TFT LCD killed the CPU on the EZBoard. Our engineer has also had stability issues with the BTT TFT LCD itself and its firmware. This information is provided as […]
Intro One thing we noticed is that on some machines Simplify3D will start to connect but then stop. This is usually caused by the firmware serial start command not matching exactly what Simplify3D is looking for. The easiest way to get around this is to just uncheck the firmware start check by following the steps […]