Under Extrusion When your print does not come out as expected and there is not enough plastic extruded this is referred to as under extrusion. This can be caused by many different things on your printer. Some issues could be related to improperly set up firmware settings to physical issues with the printer. We’re going […]
- Home
- Store
- Filament
- PLA FilamentsPLA is a biodegradable, renewable plastic that is easy to print and affordable.
- PETG FilamentsPETG is an alternative to ABS for those who do not have an enclosure to print in. PETG filaments have excellent layer adhesion and handle heat up to 70-80C for higher ambient temperatures.
- ABS FilamentsABS is a very strong plastic with high-temperature resistance (100C+). ABS should be printed inside an enclosure to ensure part strength and reduce warping.
- Nylon FilamentsNylon is a very STRONG filament where durability and layer adhesion is needed. These filaments are typically able to be printed without an enclosure and need a high nozzle temp of 230-250C and bed temp up to 80C. These are more expensive than PLA or ABS but their strength is unmatched.
- Recycled FilamentsRecycled filaments are made from recycled materials. If you’re eco-conscious these are worth checking out!
- Merch
- News
- Help Center
- Contact Us
- Tools