Selected Just for You

  • JST-XH Type Connector Kit - Plugs and Headers

    Rated 0 out of 5
    $12.99
  • Unified 2 Firmware for Voxelab V1.X.X Printers

    Rated 0 out of 5
    $5.00$18.00
  • Addon STL Package for MultiMount

    Rated 0 out of 5
    $15.00
  • Unified 2 Firmware for Creality V4.2.7 Silent Board

    Rated 4.86 out of 5 based on 7 customer ratings
    $5.00$18.00
  • Polymaker PolyTerra™ Army Dark Green PLA - 1KG 1.75mm

    Rated 0 out of 5
    $21.99
  • EZChoice Light Purple PLA - 1KG 1.75mm

    Rated 5.00 out of 5 based on 1 customer rating
    $19.99
  • AnyCubic Chiron Solid Bed Mount - STL Download

    Rated 0 out of 5
    $3.00
  • Spaghet Nebula PLA - 1KG 1.75mm - Transparent Blue with Glitter

    Rated 5.00 out of 5 based on 2 customer ratings
    $27.99
  • Micro Swiss NG™ Direct-Drive Extruder for Creality Ender 5/Ender 5 Pro/Ender 5 Plus Printers

    Rated 0 out of 5
    $119.95
  • Unified 2 Firmware for Tevo 2560 MKS Board Printers

    Rated 5.00 out of 5 based on 1 customer rating
    $5.00$18.00

Get the right part, with friendly support

3D Printing Doesn't Need to be Hard.

We’re 3D printing experts here. We eat, sleep, and breathe 3D printing. If you need help choosing a product or repairing your machine we’re here to help!

Print something beautiful!

Most Trending Items

Our Customers LOVE Our Products!

Customer reviews

4.92
Based on 889 reviews
5
93%
830
4
5%
46
3
1%
12
2
0%
0
1
0%
1
1 2 ... 112
brettstoner
March 27, 2024
Well worth it!
This makes my prints more consistent as I was getting slipping with the stock gear. Easy to install. Don't forget to re-calibrate your extruder steps.
Helpful? 0 0
brettstoner
March 27, 2024
Why did I wait so long to buy this!
Are you tired of leveling your bed a million times. Check. Are you tired of poor first layer adhesion or unevenness. Check. Do you just want to hit pr...More
Are you tired of leveling your bed a million times. Check. Are you tired of poor first layer adhesion or unevenness. Check. Do you just want to hit print and have a perfect print every time. Yes please. First make sure your gantry is perfectly square and even. Then use a fixed mount for your bed. You will need to pick up some M3x10mm screws from Lowes/HD/Online for the sensor mount. Also make sure your printer has the newer board or else you will need to add a bootloader to it. Then install and get perfect prints every time. I also needed to add more time for the heaters to recover after the bed level routine runs before it starts the print job.
Helpful? 0 0
cain.scott
March 26, 2024
Was really skeptic about this product
I print allot in ABS and have tried many other bed adhesives and had been disappointed (mainly because I am cheap) and thought that I would forever be...More
I print allot in ABS and have tried many other bed adhesives and had been disappointed (mainly because I am cheap) and thought that I would forever be relegated to ABS Slurry for my adhesive. The pain in the rear to doing that was the cleaning of the glass. Tim placed it on a discount and I decided to bite the bullet.
It is nice on how easy it lays on the glass and have used the original layer for a couple more prints. Warping is all but eliminated. I don't see any residue on the black printed parts. Sticks to the part during the entire print and finally releases cleanly (including the brim) upon the bed cooling. Cleaning is so much nicer now. A simple soap and water dose the trick nicely. I tried to clean the bed with alcohol which worked out on a forth print but I really don't recommend do that.
Would I buy this again? Well, I did and bought 2 more so 1 will be a gift for a friend.
Helpful? 0 0
Nick Girard
March 25, 2024
Quiet, strong
Added this to my cooling duct upgrade. My only recommendation is the option to include a pair of JST plugs to make the removal easier for maintenance....More
Added this to my cooling duct upgrade. My only recommendation is the option to include a pair of JST plugs to make the removal easier for maintenance. I ordered some from Amazon instead.
Helpful? 0 0
Nick Girard
March 25, 2024
Perfect fit, WAY more cooling than OEM.
Perfect fit, great product! I added the 5015 fan and hardware kit, installation took maybe 15 minutes.
Helpful? 0 0
Justin Bevins
March 23, 2024
Plug and play perfection!
I've been trying hard not to install any mods to my PS1 but this mod was a no brainer. Easy to install and provides a very nice bright light all throu...More
I've been trying hard not to install any mods to my PS1 but this mod was a no brainer. Easy to install and provides a very nice bright light all throughout the chamber (above the print bed anyhow).

Totally worth picking up especially with how cheap it was. Total install was 10 minutes and half of that was trying to find my IPA!

I did have to turn on my chamber light again as it was off after powering up post install but once I did everything worked as it should.
Helpful? 0 0
Daniel McMillen
March 22, 2024
Great replacement for OEM Tuch display
This one is far better than the Tuch display and has very few features.
This LCD has baby-stepping and all the others you could want.
Helpful? 0 0
Bambu X1 Series Lighting Upgrade Kit - V2 photo review
Gillithonnen
March 22, 2024
Bambu X1 Lighting Upgrade Kit v2
Significant improvement for lighting! Literally night and day difference. I'm looking forward to seeing the Y-connector to reconnect the stock lighti...More
Significant improvement for lighting! Literally night and day difference. I'm looking forward to seeing the Y-connector to reconnect the stock lighting, because with the LEDs above the head unit, it does cast shadows and it seems like there is a dark spot near the camera.

I've also went and made a channel for the corner above the exhaust port in lieu of the wire clips provided in the kit. https://makerworld.com/en/models/387626#profileId-288234
Helpful? 0 0
1 2 ... 112
SHARE YOUR CART