Arduino IDE for Mac OS X Setup Guide

IMPORTANT NOTES: If you are getting errors compiling for a printer with the 2560 board in it go to Tools > Boards > Board Manager. Look for ATmega2560 & revert to 1.6.21. Some users reported issues on Mac OS X with the latest 2560 board library. If you are...

Dual Extrusion Setup Information

When doing dual extrusion there are many ways to go about it. The basic requirements are that you have a board that supports 2 Extruder connections, 2 hotend connections, and 2 hotend thermistor connections. However, if you are using a 2 into 1 adapter you only need a...

EZPi Getting Started Documentation

Getting Started with the EZPi When you connect the EZPi to your machine it should automatically connect and display the IP address of your Pi on the printer LCD. If it does not you can try typing http://octopi in your browser to access it. If that fails check your...

CR-10(S) Setup and Mechanical Checks

Our friends over at TinyMachines3D.com have a VERY nice setup video and what to adjust on the machine to make sure it is working properly. We recommend you watch and see how they adjust the rollers and other parts of the machine. If you bed wheels or other wheels are...