Geeetech A10, A10M, A20, A20M Z Endstop Wiring for EZABL

The Geeetech Endstop switches have a 5V line run to them to drive the LED when the switch is activated. When using the 3 pin JST endstop connection on our EZABL boards you will need to remove the 5V line so you don’t accidentally short it to ground. The switch...

Sensors and Gantry Grounding

Issue A small instance of machines like the Ender 3 exhibit issues with the EZABL sensors stay triggered due to poor/no grounding. We do have an option to turn the motors off (XYE) during probing in our latest firmware which fixes this issue but the root cause is that...