THESE SCREENS ARE B-STOCK, WHICH MEANS THEY ARE FULLY FUNCTIONAL BUT WILL HAVE COSMETIC BLEMISHES.
What makes these B-Stock? B-Stock LCDs typically have small scratch/scratches on the LCD panel but no dead pixels. All B-Stock LCDs are fully tested to be working before shipment.
Full Graphics LCD Controller w/Full-Size SD Reader
Control your printer with NO PC required
Includes 2x 12″ 10 Pin LCD Cables
For use with the EZBoard the Dual Cable LCD adapter is required.
White text on a blue background for LCD
PCB color may vary from photo depending on batch
Note: Due to varying Board/LCD/Cable Header direction if the LCD does not light then rotate the plug end at ONE END (LCD side or board side) 180 degrees and plug it into the header. Do this for both EXP1 and EXP2 if the LCD does not light.
How to flip the cable ends: 12864 LCD Screen Not Lighting Up – TH3D Studio LLC
DIY Part Fitment/Installation/Wiring
This is a universal DIY 3D printer part. That means it will work on almost any 3D printer, but you must know what you are doing.
Our technical support does not cover selecting/designing/assisting in firmware setup and/or 3d models to install this part on your printer. If purchased as part of a kit from TH3D for a particular printer, then it will be covered under the kit when using our firmware package.
Electrical replacement parts usually will require you to splice wires into your existing ones for the part you are replacing (soldering and heat shrinking wire splices is recommended for proper connection).
Some of our universal electrical parts come with bare wire ends or plugs on them. These ends may or may not directly plug into your 3D printer. If they do not, you will need to splice the wires into the existing ones on your 3D printer.
B-Stock Warranty Information
1 Month Warranty - Our warranty covers any and all defects with the product, but not cosmetic ones or other defects disclosed on the product page. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. All sales are final on B-Stock products
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.