CR-10S V2.0/V2.1/V2.2 C4 & CR-10 V1.1.2/V1.1.3/V1.1.4/V1.1.5 Replacement Capacitor – 2 Pack

(2 customer reviews)

$9.99

  • Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 and V1.1.2/V1.1.3 Boards
  • Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair
  • Guaranteed to fix the temperature fluctuation issue
    • Exact capacitor that TH3D uses for repairs
  • Do NOT buy this if you do not know how to solder.

In stock

Purchase this product now and earn 10 Benchies!

Product Info

This is being offered for people that know how to solder and want to make sure they are getting the correct cap to fix the temperature issue. TH3D will NOT be held liable for damage to your board due to improper DIY installation.

  • Replacement SMD Capacitor for C4 Capacitor on the CR-10S V2.0/V2.1 and V1.1.2/V1.1.3 Boards
    • You will get 2 capacitors in total
  • Information on replacement here (DIY Guide Link on page): CR-10S V2.0/V2.1 Temperature Repair
  • Guaranteed to fix the temperature fluctuation issue
    • Exact capacitor that TH3D uses for repairs
  • Do NOT buy this if you do not know how to solder.

Caps will be in sealed reel container as pictured.

Support/Warranty

  • Included Support: TH3D Community Support
  • Warranty: 30 Days
    • Warranty is only on caps defective out of the box
    • NO support is included, this is for DIY repairs only

Manufacturer Specs

Repair Videos

Best Sellers

Share your thoughts!

5 out of 5 stars

2 reviews

Let us know what you think...

What others are saying

  1. John Holmstadt (verified owner)

    Perfect replacement part! Used to have a terrible swing in temps on my CR-10S which was severe enough to make printing at higher temps near impossible as it would cause Marlin to throw an error about the hotend temps and the printer would enter a failsafe mode. Now I have rock-solid temps, usually hovering within 0.1 degrees, and rarely bumping outside of 1.5 degrees during a print. Much happier with my PETG prints now, as the stable temps seem to have improved the print quality.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Nexxen (verified owner)

    This part saved my printer. So before replacing the capacitor, my hotend temps would drop anywhere from 0.1 degrees all the way down to 50 degrees from the set temperature and was incredible sporadic making it impossible to print. After replacing the capacitor my hotend temps now only fluctuate 0.1 degrees from the set temperature. Also this was my first attempt at soldering on a board and Tim’s video made the entire process a cake walk.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up