Stiffen up your printer bed with these solid bed mounts, see below for what machines are guaranteed to work with each kit. Made from black ABS with an Aluminum sleeve for maximum stability.
Shipping Time Note: All Solid Mount Orders ship in 1-2 days as we hand make them here in the US.
Please red below for fitment notes for your particular machine. If you have a large hotend mount that is not stock the camera arm may interfere with the mount near the corner of the bed. Stock hotend mounts and aftermarket mounts (like the PETSFang and HeroMe) will work with the camera arms.
- Standard kit includes 3 Round mounts and 1 Bed Strain Mount
- Camera Kit includes 2 Round Mounts, 1 Bed Strain Mount, and a custom 3 prong style camera mount and includes a mount for one of the below cameras free with the kit (select on the product page). The small adapter pieces are in PLA and STL files are also available on our site.
- Camera arm is meant to mount to the front right of the bed coming off the corner to get a view of the bed. If you have a Z tower brace it may not fit. Use the standard kit instead.
- Logitech C270/C310
- Logitech C615
- Logitech C920
- Raspberry Pi Cam (V1)
- GoPro Cameras
- Cam arm kit does not work with the Ender 5 due to the bed setup.
- Camera arm is meant to mount to the front right of the bed coming off the corner to get a view of the bed. If you have a Z tower brace it may not fit. Use the standard kit instead.
- Universal Kit includes 4 Round mounts – Made for new S5 with Aluminum Frame Under Bed
- Works with the CR-10 S5 with the aluminum frame under the bed
- Works with the Tevo Tarantula Pro
- Works with the following models (check description under the selection menus for compatibility notes)
- Ender 3
- Ender 5
- Ender 5 Plus
- CR-X
- CR-20
- CR-10
- CR-10 Mini
- CR-10 S4
- CR-10 S5
- CR-10S
- CR-10S Pro
- CR-10S Mini
- CR-10S S4
- CR-10S S5
- Tevo Tarantula Pro
- Replaces the bed springs to add stability to the bed.
- You can use loctite or superglue on the bed nuts to keep them in place if you have issues with them spinning off.
- EZABL Kit REQUIRED. DO NOT USE WITHOUT AN EZABL KIT.
- Designed & Made in USA by TH3D.
- Total weight
- 1.5OZ for Standard Kit
- 2.5OZ for Camera Kit (Not including camera)
- Includes Zip ties to secure Bed wiring to strain relief and screws for the camera kit (if camera kit is ordered)
- Tested not to warp at temps up to 110C
- Printed in ABS at 0.3mm Layer Height and 35% infill. Parts pictured are of actual product. Since these are 3D printed there may be slight variations in surface finish due to the nature of 3D printing.
- Aluminum spacers press fit into ABS parts, spacers will be slightly higher than the ABS part as the bed sits on the aluminum not the ABS itself.
- Height is 22mm +/- 0.3mm on spacers. Variations in height do not affect EZABL as the EZABL system will handle any differences.
Installation Instructions are located here: TH3D Solid Bed Mounts Installation Information
Picture of the S5 with Frame Under Bed for Reference:
Warranty & Support Information
Technical Support: TH3D Community Support
Technical support with for product it is handled through our TH3D Communities. You can get access to them on our Community Page. If you require consulting time direct from the TH3D team to use/install the part it is available for an additional, hourly consulting charge.
Warranty Length: 3 Months
Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. This is for warranty related issues only, not technical support. Damage/Failure due to improper installation, usage, failure resulting from an issue with the machine the product is installed on, and/or modification or the product is not covered under warranty
Bed Strain is modified from Greg191134’s model under the Creative Commons Attribution 3.0 Unported (CC BY 3.0) license: https://www.thingiverse.com/thing:2186203
0 reviews with a 4-star rating
There are no reviews with a 4-star rating yet