Creality CR-10 V1.1.2/V1.1.3 Board Repair – Temperature Fluctuation

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$19.99$39.99

  • Fixes Temperature Issues with V1.1.2 CR-10 Boards
    • SEE BELOW FOR VIDEO OF ISSUE
  • High Quality – Name Brands Caps Used
  • Cap is secured to the board with silicone adhesive after soldering
  • 30 Day Guarantee on Work
  • Shipping you pay at checkout is for return shipping to you
  • Tested upon receipt AND before shipping out after repair is completed
  • Turnaround time is under 2 days for bare boards and 3-4 for control boxes.
  • Be sure you have ruled out bad thermistors on your printer before purchasing this
  • YOU MUST SHIP YOUR BOARD OR CONTROL BOX FOR US TO REPAIR.
  • US/CANADA CUSTOMERS ONLY
Clear

Earn up to 40 benchies.

Product Info

The CR-10 V1.1.2 boards have a design issue that creates inaccurate temperature readings. If you have this board this repair service will fix your board and send you back your board with the fix applied. We will be adding on additional high-quality caps to filter the power going to the CPU that will fix the temperature issues that are present on these boards. The capacitor we are installing is what SHOULD have been on the board but because Creality was cutting costs they used the wrong component. Some V1.1.3 boards still have this issue even with the new cap fitted by Creality so if yours has this issue this will fix those as well.

Be sure you have ruled out bad thermistors on your printer before shipping. We have known working thermistors here and will test before shipping.

You must have a working board/control box all ready to send to us. You can send just the board or the entire control box. Upon receiving your board or control box we will make sure it powers up and if it does we will repair it. If it does not power on you will be notified. 

Make sure your board matches the one in the picture. Turnaround time is under 2 days for bare boards and 3-4 for control boxes.

DO NOT INCLUDE THE LCD OR ANY CABLES IF YOU ARE SENDING JUST THE BOARD.

DO NOT INCLUDE ANY POWER CABLES, FILAMENT SENSOR, SPOOL HOLDER, OR ANYTHING ELSE THAT CAN BE DETACHED. Be sure to pack the control box well to ensure it is not damaged during shipping. We will use your packaging to send the control box back to you. Please ship to us using an INSURED service like USPS Priority Mail.

Upon repairing the board will be connected to 12V, LCD, and thermistors to verify that it is working after the repair is completed. Once it is completed it will be re-packed and shipped to you.

What does the issue look like? See below for before and after videos.

Before Repair (Click to view video GIF)

Same Board After Repair (Click to view video GIF)


You MUST send us a board or control box for us to repair. This is NOT for a purchase of a new board or control box. Charges are for parts and labor. US/CANADA CUSTOMERS ONLY.

Best Sellers

1 review for Creality CR-10 V1.1.2/V1.1.3 Board Repair – Temperature Fluctuation

  1. ericmkuntz

    This fixed my temperature issues on my CR-10 Mini. Temperatures were hopping back and forth 5-7 degrees every second. After the repair, my temperatures are rock solid. Would absolutely do this again if I had another printer that needed it.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.