Creality Ender 3/CR-20 Enclosure

$195.00$225.00

  • Enclosed build chamber
  • Hinged doors on the front of the enclosure
  • Knock out holes for a BOFA Print Pro 3 HEPA filter system or mount your own 60mm fans on the side.
  • Laser engraved PrintedSolid.com logo on the front.
  • No glue is required for assembly and can easily be disassembled for moving or replacing panels if damaged.
  • No drilling, cutting, or other modifications to the printer itself are required.
  • Mount points for a Raspberry Pi and spool holder mounted to the side of the enclosure.
  • 2-3 Day lead Time
  • US ONLY – FREE SHIPPING
Clear

Earn up to 225 Benchies.

Product Info

 

NOTE:  The sheets in this kit come covered in a protective masking tape that should be removed before assembly.

This is an enclosure kit for Ender 3 OR CR-20 Printers

Help regulate the temperature and reduce drafts for improved print quality and keep curious fingers (or paws) off of your print. You also get a slight reduction in the already low noise output of the printer.

The kit includes an instruction sheet, the laser cut panels, door hinges, and fasteners.  The Ender 3/CR-20 3D printer is not included with the enclosure kit.

Some of the features of the design that we think are really neat:

  • Enclosed build chamber
  • Hinged doors on the front of the enclosure
  • Knock out holes for a BOFA Print Pro 3 HEPA filter system or mount your own 60mm fans on the side.
  • Laser engraved PrintedSolid.com logo on the front.
  • No glue is required for assembly and can easily be disassembled for moving or replacing panels if damaged.
  • No drilling, cutting, or other modifications to the printer itself are required.
  • Mount points for a Raspberry Pi and spool holder mounted to the side of the enclosure.
  • Assembly Directions included in the package
  • 2-3 Day lead Time – These are shipped directly from our supplier, made to order in the USA.
  • US ONLY – FREE SHIPPING

Support/Warranty

Dimensions:

External dimensions are 23″ deep by 21″ wide by 21″ tall w/o spool holder on side.

Best Sellers

Share your thoughts!

Let us know what you think...

What others are saying

  1. Question

    Jason

    How well hoes this keep the electronics for the CR20 ventilated since heat can eventually kill the electronics?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Tim Hoogland

      Our Ender 3 farm has been running with these for over a year now with no board failures and that is with additional insulation. The stock enclosure does breath a little and usually will be around 40-45C during ABS (100C bed) printing.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • bill sawyer

      Are the panels metal or plastic?

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Tim Hoogland

      These are made from laser cut laminate wood board.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up