Features/Details
- Genuine Creality V24S1_301 board with Trinamic TMC2225 Drivers
- Guaranteed Genuine STM32 CPU – With manufacturers swapping out STM32 CPUs in favor of knock-off chips, we are opening and checking EVERY board before shipment to ensure it has a genuine STM32 CPU on it as well as what memory size they have.
- 256K Memory with F1 or F4 CPUs (Select Above) with EEPROM support
- Works with the Ender 3 S1 and its stock LCD or our 12864 LCD Kit and firmware
- Works with the Ender 3 S1 Pro when using our 12864 LCD Kit and firmware
- Works with the Ender 3 S1 Plus when using our 12864 LCD Kit and firmware
- Includes a bootloader pre-flashed
- Uses USB C Cable to Connect (not included)
- Free firmware available from TH3D Studio – Ships with Creality Ender 3 S1 Firmware
- Ender 3 S1 Firmware – F1 & F4 CPUs
- Ender 3 S1 Pro Firmware – F1 & F4 CPUs
- Ender 3 S1 Plus Firmware – F1 & F4 CPUs (COMING SOON)
- Compatible with EZABL and BL Touch Probes
- VREF is set with the pots next to each driver – Make sure to set the VREF for your machine. Refer to Creality documentation for the VREFs for their printers.
Warranty Information
3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Question
douglas –
Is this an exact OEM replacement, should you fry yours, or is this is an upgrade over factory. If an upgrade, could you list what enhancements over factory there are?
(0) (0) Watch Unwatch
Tim Hoogland –
This is the OEM board from Creality. It’s the same as what came with the machines. There are 2 different CPUs they used but they both do the same thing.
(0) (0)
Question
willpalmer68 –
With this kit, will I still be able to use the CR Touch ABL? I have a Ender-3 S1 Pro with the STM32F401 chip.
(0) (0) Watch Unwatch
Tim Hoogland –
Hi there, this is just a control board, not a kit. It works with the stock ABL sensor and is the same board that Creality uses in the Ender 3 S1/S1 Pro printers.
(0) (0)
Question
Korey Griswold –
Is the f1 board favored over the f4 and if so why?
(0) (0) Watch Unwatch
Tim Hoogland –
It is not, they both do the same thing.
(0) (0)