Dual Z Upgrade Kit For Ender 3, Ender 3 Pro, Ender 3 V2, CR-20, & Voxelab Aquila

What printers does this fit?

• Ender 3
• Ender 3 Pro
• Ender 3 V2
• CR-20
• Voxelab Aquila X1

Kit Contents:

• 4x M4 screws with T-Nuts for bearing blocks
• 2x All-Metal Z Bearing Blocks for Z Rods with Bearings Pre-Installed
• 2x M4 Screws with T-Nuts for Belt Pulley Bracket
• 3x M5 Spacers for Gantry Bracket
• 3x M5 Screws for Gantry Bracket Wheels
• 1x ACM Tensioner Bracket with Idler Preinstalled
  • Kits shipped after 1/1/2022 will have a longer tensioner bracket that allows for a wider range of adjustment and mounting than what is shown in the installation pictures. Installation is the same.
• 2x M4 Washers included for the ACM bracket bolts to prevent damage from over-tightening included.
• 2x M8 Pulleys for Belt
• 1x GT2 Belt for Linking Z Rods
• 1x Z Rod for Motor Side
• All-Metal Dual Z bracket with brass nut and 2x M3 Screws
  • NOTE: Brass nut and 2x M3 Screws provided in parts bag (may not be installed in the bracket)
• Installation Guide Link
• PSU Relocation Downloads

Installation Information

Install Guide: The installation guide with FULL pictures can be found here: https://support.th3dstudio.com/helpcenter/dual-z-kit-installation-guide-for-ender-3-ender-3-pro-ender-3-v2-cr-20-voxelab-aquila/ <- Read this for installation information.

Edge of Tech Install Video (Ender 3 Models): https://www.youtube.com/watch?v=03fQciqSdVM

Warranty Information

3 Months Warranty -  Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Technical support is limited to the scope of the product itself and not your entire machine.

Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.