Why do you want this upgrade?
The Ender 5 Plus has a touchscreen from the factory. This may look pretty with its color graphics but you’re missing out on a lot of control and features (like live Z adjustment) by using the stock screen. When you add this to your Ender 5 Plus you get access to the FULL LCD menu system available on our Unified 2 Firmware (built on Marlin) with no limitations. You get more control over the BLTouch sensor that comes on the printer and you can even upgrade to our EZABL if you’re not happy with the stock BLTouch.
Running an aftermarket board? This kit works with the stock control board (V2.X version) and with our EZBoard products. If you have an EZBoard and did not purchase the Dual Cable LCD adapter board you will also need that added on (see above) to use this kit with our EZBoard.
Also works with the following 3rd party 32-bit boards when you add on the Dual Cable LCD adapter board (addon above)
- Creality V4.2.7 – Firmware: Creality Ender 5 Plus Firmware – V4.2.7 Board – TH3D Studio Help Center – (BLTouch requires 10-pin Extension Cable)
- BTT SKR E3 Mini V1 – Firmware: Creality Ender 5 Plus Firmware – SKR E3 Mini V1/V1.2/V2 Board – TH3D Studio Help Center
- BTT SKR E3 Mini V1.2 – Firmware: Creality Ender 5 Plus Firmware – SKR E3 Mini V1/V1.2/V2 Board – TH3D Studio Help Center
- BTT SKR E3 Mini V2 – Firmware: Creality Ender 5 Plus Firmware – SKR E3 Mini V1/V1.2/V2 Board – TH3D Studio Help Center
- BTT SKR E3 Mini V3 – Firmware: Creality Ender 5 Plus Firmware – SKR E3 Mini V3 Board – TH3D Studio Help Center
Have questions about this upgrade? Contact our support team and we’ll be happy to assist!
Will this work with Klipper?
Yes, these LCDs and the stock board are supported by Klipper firmware. However, due to the complexity of Klipper, our technical support that is included does NOT apply if you are using Klipper firmware. Technical support only applies when you are using our Unified 2 Firmware package that is included.
Design Note: Housing design may be slightly different than shown in the pictures and/or videos as we make improvements to the design as we get feedback from customers.
Key Features
- Babystepping Z (Live Z Adjustment)
- Full ABL Probe Offset and other settings
- EStep Settings
- Acceleration/Jerk Settings
- Firmware has Thermal Runaway Protection
What is included?
- Printed LCD housing – Made in the USA with ABS Plastic
- Screws for the 12864 LCD
- Screws and TNuts to Mount the LCD to the Ender 5 Plus (M4x10mm + M4 TNuts, 3 sets total)
- 12864 LCD Screen with Cables and Knob
- Note: SD slot on LCD is not used and is covered up in our LCD housing design to prevent confusion, the SD slot on the printer board is what you will still use
- Simple setup and firmware update included in our Unified 2 Firmware to support the new LCD
jeremiah pendergrass` (verified owner) –
TH3D Creality Ender 5 Plus 12864 LCD Conversion/Upgrade Kit Review: Unlocking Full Control and Features
The TH3D Creality Ender 5 Plus 12864 LCD Conversion/Upgrade Kit is a game-changer for Ender 5 Plus owners seeking to enhance control, features, and overall usability. This comprehensive kit provides an effortless solution to upgrade the factory touchscreen to a 12864 LCD without any soldering. In this review, we’ll delve into the key features, installation process, and the benefits of this conversion kit.
Key Features:
No-Solder Installation: One of the standout features of this kit is its no-solder installation process. TH3D Studio has designed the kit for simplicity, ensuring users can easily upgrade their Ender 5 Plus without the need for intricate soldering work.
Unified Firmware Support: The kit includes a firmware update that seamlessly integrates with the Unified 2 Firmware (built on Marlin). This means users can access the full LCD menu system, unlocking a plethora of controls and features previously unavailable with the factory touchscreen.
Enhanced Control with Unified 2 Firmware: By switching to the 12864 LCD, users gain access to advanced controls, including live Z adjustment and additional features for the BLTouch sensor. This upgrade empowers users to have greater control over their 3D printing experience.
Compatibility with Stock and Aftermarket Boards: Whether you are using the stock control board (V2.X version) or TH3D’s EZBoard products, this kit seamlessly integrates without issues. For EZBoard users, an optional Dual Cable LCD adapter board is available for purchase.
Third-Party Board Compatibility: The kit extends its compatibility to various 3rd party 32-bit boards, such as Creality V4.2.7 and BTT SKR E3 Mini series, making it versatile for users with different board preferences.
Installation Process:
The TH3D Creality Ender 5 Plus 12864 LCD Conversion/Upgrade Kit is designed for user-friendly installation. The no-solder setup ensures a hassle-free process, and the included firmware update simplifies the transition to the Unified 2 Firmware. Clear instructions from TH3D Studio make this upgrade accessible even for users with limited technical expertise.
Benefits and User Experience:
After upgrading to the 12864 LCD, Ender 5 Plus users will appreciate the expanded menu system and the added functionality. Live Z adjustment and improved BLTouch sensor control are notable enhancements that contribute to a more streamlined and efficient 3D printing workflow.
Conclusion:
In conclusion, the TH3D Creality Ender 5 Plus 12864 LCD Conversion/Upgrade Kit is an excellent investment for users looking to maximize their 3D printing capabilities. With easy installation, broad compatibility, and access to advanced controls through Unified 2 Firmware, this kit transforms the Ender 5 Plus into a more versatile and powerful 3D printing machine. TH3D Studio once again delivers a quality solution, making this upgrade a highly recommended choice for Ender 5 Plus enthusiasts.
Chandler (verified owner) –
Sam (verified owner) –
Great kit! The install video needs to be updated to show newer firmware though
Jesse McGuire (verified owner) –
Great fit
Adam B. (verified owner) –
The LCD works as advertised.
Emerson Corder (verified owner) –
An absolute must to unlock the features of the Ender 5 Plus. The stock touch screen is junk and prevents you from doing something as simple as an M600.
3d-2109 (verified owner) –
I installed this with my new EZBoard. I had to reverse both of the ribbon cables, but that’s it. It works perfectly and matches the printer as well!
Miguel Marin (verified owner) –
How do you set up the firmware on IDE with the new firmware? The link above is not found.
aubiecat1 (verified owner) –
This is a very nice kit! It easy to set up and the firmware is easy to compile with VS code. I have to say you weren’t kidding about how much functionality I’ve been missing with the default touch screen.
The amount of feedback on this screen is just what I wanted.
Satisfied customer.