Power your EZABL kit from any USB port (0.5A required).
This takes the 5V input and steps it up to 12V to run the kit. No extra adapters to plug in!
Tested to work with:
- Standard PC
- Raspberry Pi 1,2, and 3
- Most USB Chargers
Warranty Information
3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Technical support is limited to the scope of the product itself and not your entire machine.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Question
cwatkins0928 –
Why is this not included in the kit? Might be a idea to raise the price and include it.
(0) (0) Watch Unwatch
Tim Hoogland –
You can add it on when you order the kit already from the main EZABL page.
Only about 30% of users opt to get some type of adapter since it is not a required part. We include wire to power the EZABL from the printer PSU. The power adapter options are meant to make installation less intimidating for those who don’t want to wire to their power supply.
(0) (0)
Question
Albert Pierce (verified owner) –
I have a known good USB to 12V adapter cable ( good quality from reputable vendor) very similar to yours. Is the DC plug on your adapter the standard outside negative center pin positive type?
(0) (0) Watch Unwatch
Tim Hoogland –
Our adapters are center pin positive. We do recommend using adapters from us as there can be quite a quality variation between adapters that could negatively affect the accuracy of the probe.
(1) (0)