(312) 858-TH3D (8433) Support@TH3DStudio.com

EZABL Kit – Direct Wire Kit V3

Rated 5.00 out of 5 based on 11 customer ratings
(11 customer reviews)

$59.99

Easily Add Auto Bed Leveling to your 3D Printer! NO soldering at all!

  • Includes the TH3D EZABL Sensor pre-wired to our EZABL V3 Board and wire for power
  • Works on Glass, Mirror, Aluminum, Buildtak, Acrylic, and more
  • Full Installation Documentation Included in the EZABL Customer Package
  • Pre-setup Firmware Included FREE to get you going quick with all mounts
    • Sensor mount NOT included as we support many models. We include a STL pack with all the mounts.
    • If you need a mount printed you can contact us and we can let you know. Some we will do for free (like the smaller OEM Mounts) others do have a charge.
  • Support over Email is included with the kit through our TH3D Help Desk
  • 100% Original Kit Developed and Assembled in the USA by TH3D (We build every kit by hand)

Description

The EZABL Kit is a fully original design that makes adding an Auto Bed Leveling Sensor to your printer much easier than DIY solutions.

***This version requires hooking up the included power wire to your 12V or 24V printer power supply AND cutting the Z endstop wire to connect to our module. If you are not comfortable running wire or it’s difficult to get access to your printer power supply then look a the EZ-Connect version which has it’s own power adapter.***

Installation Video:

You will receive a full kit that includes:

  • TH3D EZABL Sensor pre-wired to our EZABL V3 Board and wire for power
  • Works on Glass, Mirror, Aluminum, Buildtak, Acrylic, and more
    • If you have an AC bed please see notes below about using it with the EZABL
  • Full Installation Documentation Included in the EZABL Customer Package
  • Pre-setup Firmware Included FREE to get you going quick
    • Sensor mount NOT included as we support many models. We include a STL pack with all the mounts.
    • If you need a mount printed you can contact us and we can let you know. Some we will do for free (like the smaller OEM Mounts) others do have a charge.
  • Support over Email is included with the kit through our TH3D Help Desk
  • 100% Original Kit Developed and Assembled in the USA by TH3D (We build every kit by hand)
  • Tech Specs:
    • Onboard Power Filtering & Decoupling
    • High Speed Toshiba Optocoupler IC
    • Reverse Voltage Protection
    • High quality 2oz Copper, 2 Layer PCB w/ Full Ground Plane
    • TH3D 100hz 18mm Capacitive Sensor
      • Weighs only 40 grams
  • Works with ANY printer that runs Marlin and our support can help you get it running and setup. If you are unsure about what your printer runs please Contact Us.
  • Some printers require a bootloader that needs an Uno to be flashed. Please check the Unified Firmware page to see if yours needs one (CR-10, Wanhao i3, Ender 2, Ender 3)

Support/Warranty

  • Included Support: TH3D Standard Support
  • Warranty: 90 Days
    • Physical or Electrical Damage due to improper installation or use is not covered. Items are all pre-tested before leaving the shop.

Extensive firmware setup assistance – phone, messenger, or video chat – is available but there may be a charge for this due to the involvement required or what the issue is. This does not apply if you are using a pre-supported printer listed above. Meaning if you want to add EZABL and aren’t familiar with your board/printer firmware we can assist you with this.

AC Bed Notes:

If you have an AC bed the frequency of the AC current can throw off the accuracy of the sensor. This can be avoided by simply turning off the AC bed when Z homes and G29 runs. Once those are completed you can turn the bed back on. If you use a SSR to control the AC bed (like what the Tevo Tornado has from the factory) the firmware will automatically manage this for you. If you are doing your own DIY SSR+AC Bed setup we highly recommend the MSSSR20 SSR from Misumi as it has very low AC leakage current. Some low quality SSRs will leak a small amount of AC current and can affect the sensor even when in the off state. There is a guide on our knowledgebase about using a wifi outlet + raspberry pi to manage a standalone heater.

Tevo Tornado Notes:

Some Tevo Tornado printers shipped with very low quality power supplies that have an open or poor ground and/or Solid State Relays that leak AC current. This can cause the kit to not work. Unless you have a high end multimeter or scope to check the grounding and ripping on the machine there is no way to tell if yours is affected. A new PSU and SSR is between $30-50 and we sell both of these for just a hair over cost to make replacements easy. If you end up not wanting to swap the PSU and SSR and you have a Tornado we will waive the restocking fee if you choose to return it. This affects our sensors, other similar types, and even BL Touch sensors (clones included).


If you have any inquiries feel free to Contact Us!

Additional information

Weight8 oz
Dimensions4 x 4 x 2 in

11 reviews for EZABL Kit – Direct Wire Kit V3

  1. Rated 5 out of 5

    dubbedout (verified owner)

    I’m new to the 3D printing world and was struggling to keep my CR-10 bed level and get good consistent results. This kit was very easy to install, the instructions are very detailed and any issue I ran into was fully documented in the instructions.

  2. Rated 5 out of 5

    Tor.blzb

    Amazing product, had some trouble setting it up and the support was great at helping me get it going. Now I click and print without having a few fails before that for having a slightly off bed level

  3. Rated 5 out of 5

    kevyn

    I was having a nightmare getting my CR-10 to print consistently, I was constantly re-leveling the bed and starting to hate my printer, I got the EZABL and solid bed mounts, and my printer is like night and day, I love the fact I can just click to start a print and I don’t have to worry about if it will stick to the bed. It does. Every single time.

    I love it so much I got a second one for my Ender 2 printer as well!

  4. Rated 5 out of 5

    jwilliams (verified owner)

    After doing much research in different options for ABL I decided to go with the EZABL solution and couldn’t be happier. Not having to worry about paper or slight skew in the bed makes printing much more reliable without the stress of validating every time. TH3D has been very helpful with any questions or potential issues. I just ordered a second one for my other printer as I forgot how painful manually leveling was.

    For anyone who has a skewed bed, large hands that makes getting to the wheels painful, or just want to be able to focus on printing, not leveling, this is the product for you.

  5. Rated 5 out of 5

    tim.btsi (verified owner)

    If you want to add auto bed leveling to your printer but don’t know all the ins and outs of it or the firmware, then this is your answer. When you purchase this kit you get everything you need, the abl, the instructions, the firmware, the mounts for your printer, and the SUPPORT that other companies say they offer but never actually help.
    This kit works, plain and simple. I bought the ez connect version for one printer, then bought the direct wire version for a 2nd printer. Both are easy to install and setup.

  6. Rated 5 out of 5

    pablo.burgos.lopez (verified owner)

    So easy and accurate I love it. My Cr-10 now is complete.

  7. Rated 5 out of 5

    JEKNAPP1 (verified owner)

    I bought 2 Direct Wire EZAbl kits for my Creality cr10 printers.Installing and setting up is a breeze.They work great and have had no problems with them.They make life much easier not having to manually level the bed all the time.I highly recommend.

  8. Rated 5 out of 5

    vincentgroenewold (verified owner)

    First time 3D printer user, but getting frustrated with leveling by hand of my Ender 2 pretty quick (mainly due to the small knobs). Ordered this sensor and using it with a custom mount, working amazingly well! Ofcourse did fix my Z axis first and the sensor seems to work consistently well. One tip; I calibrated my Z-offset with 2 pieces of paper, but this turned out to be too low still, I ended up with petg melted into the bed. For some reason, even though I calibrated with a hot bed multiple times, my offset should have been 0.35 higher. Moral of the story, start with too high of an offset and then dial it in slowly watching the printer print a test pattern.

  9. Rated 5 out of 5

    recreant359

    I got V1 and am only now getting to this review, but these sensors have changed my life! I had a warped aluminum bed and this kit solves that problem in software. This setup is so good it should come standard on all 3d printers!

  10. Rated 5 out of 5

    vivek_bouderlique

    If someone is thinking of ordering this kit to europe (France for me), don’t hesitate. The kit arrived in less then 6 days !
    I’m new to 3d printing and I have trouble printing with ABS, I hope the bed leveling will no longer be an issue so I can concentrate on other parameters on my CR-10 (temperature, warping, etc).

  11. Rated 5 out of 5

    2densuke (verified owner)

    Flawless install and setup. The instructions are really top notch. I got the best first layer I have ever gotten on the first try.

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…