Sale!

EZFlex MEGA System – Flexible Print Surface Bundle

(1 customer review)

From: $66.98 $60.28

  • Select your size and select your build sheet(s) below
  • Build your own bundle!
  • Add on the EZFlex Magnetic Base to use the EZFlex Plate with NO bed clips!

EZFlex MEGA Plate w/EZPEI Pre-Applied

Our MEGA size EZFlex plate with EZPei Pre-Applied

EZFlex Magnetic Base

Attach the EZFlex Plate to your printer bed with NO bed clips! Rated up to 120C temperature!

Additional EZPei Build Sheets – optional

Effortless removal when used with the EZFlex, no scraper needed - Medium Adhesion Strength

EZMat Build Sheets – optional

Average removal when used with the EZFlex, scraper may be needed - High Adhesion Strength

Earn up to 870 Benchies.

Product Info

  • Select your size and select your build sheet(s) above
  • Precision cut steel sheet with rounded corners – works with magnets/magnetic sheets.
    • EZ400 is 405×405 and has lifting tabs
      • Works with the CR-10 S4 and Alfawise U10
    • EZ500 is 508×508 and has lifting tabs
      • Works with the CR-10 S5
    • 1mm thick with EZPei applied
  • Build your own bundle!

Build Surface Notes

  • The EZPei sheets when used with the EZFlex sheet will let parts remove with minimal effort from the plate
  • The EZMat sheets when used with the EZFlex sheet will let parts remove with average effort from the plate. Parts will be loosened up but a scraper may still be needed but parts will lift partially off so you can easily get under them with your scraper to pop them off all the way.
  • When applying the EZPei or EZMat to the flex plate apply it to the side with the logo.

Best Sellers

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

What others are saying

  1. An amazing addition to my S4

    Admin Tor Blazeby (verified owner)

    I’ve had the stock glass on my CR10 S4 for the past 2 years and switched to this and it makes removing my failures(and sometimes finished prints) a breeze. No issues with adhesion and prints pop right off once flexed slightly.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Fernando Mora

      N00b question! Why is the steel plate for the CR-10 S4 405mm instead of 410mm?

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Tim Hoogland

      So it fits the Alfawise U10 as well as the S4. The S4 print area is only 400×400, not 410.

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Fernando Mora

      Thank you Tim, I asked cause my build plate measures 410mm. Thanks again!

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up