EZOut BLTouch Adapter Board for AnyCubic Mega Zero V1/V2

The original Adapter board to make connecting a filament sensor or BL Touch painless to your printer.

Wide power traces with 2oz Copper PCB, Firmware Included via Download

NOTE: A bootloader required to update firmware flash your bootloader with an Uno.

From: $7.99

Don't have a bootloader on your board?

Add on our easy to use bootloader kit to flash your bootloader.


Why do you want this upgrade?

If you get the EZOut board you will be using this to connect a BL Touch ABL sensor to your 3D Printer. You plug this board into your LCD header on your control board and then plug the LCD cable into our board. You then have the required 5V, Ground, and Signal pins available to connect to your BL Touch Sensor with ZERO soldering. The signal pin broken out on our board is Pin 27, this will be your SERVO pin in your firmware.

Installation Links

EZOut Installation Guide

Use our new Unified 2.0 Firmware and follow our setup guide for the BLTouch here: Unified Firmware – BLTouch Settings

Bootloader Required

You can add on a bootloader kit above and there is a very easy to follow guide with a video on our page here: 1284p Printer Bootloader Flashing Video Guide – CR-10/Ender 2 3 5/Wanhao i3/Anet


  • Why is there a pin missing on the header?
    • This is removed so the pin does not connect to the LCD after installation and is completely normal.
  • Is a BLTouch Included?
    • No, this is just for our adapter PCB. BLTouch sold separately.

Additional information

Don't have a bootloader on your board?

Weight 4 oz
Dimensions 6 × 6 × 2 in
Made In

🇨🇳 China w/QC in 🇺🇸 USA

Warranty Length

6 Months


There are no reviews yet.

Be the first to review “EZOut BLTouch Adapter Board for AnyCubic Mega Zero V1/V2”