What is this for?
This is for if you are building your own OctoPrint kit and need a MicroSD card for it. These cards are pre-flashed and tested by us with our latest EZPi Octoprint image. No more messing with flashing tools to try and flash your card. These are ready to pop in your Raspberry Pi board and power it up!
Our image is pre-setup with handy plugins and other customizations that we feel make for a great OctoPrint experience. You can see all the details of what is in our image on the EZPi Image page.
What Raspberry Pi Boards does this work with?
This works with and has been tested on the Raspberry Pi 3B, 3B+, and 4B boards.
It is NOT recommended to use the Pi Zero or Pi Zero W as they are too slow.
May work with the new Pi Zero 2 boards, but we do not have those so we cannot guarantee compatibility with the Zero 2.
What else will I need?
- Raspberry Pi board (3B, 3B+, or 4B)
- Power Adapter
- Case
- USB cable to connect from the Pi to your printer
We have USB C power adapters available as an add-on above. We also carry Raspberry Pi cases, heatsinks, and other accessories in our Raspberry Pi shop section. Make sure to use a high-quality power adapter to power your Pi board and NOT a phone charger.
What kind of MicroSD cards are these?
All MicroSD cards we use are name-brand and Class 10 rated or better. We do not use “generic” or off-brand cards for these or our kits. Using cheap cards will result in pre-mature failure and/or performance issues.
SD Holder Note: The free SD holder included will vary in color depending on what we printed that week.
Processing Time
We flash all cards at the time of purchase so they have the latest image we are using. This may delay shipment by 1-3 days at most. Most orders for this MicroSD card should ship in 1 day normally.
Warranty Information
3 Months Warranty -Â Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Question
jeffboiii (verified owner) –
This came with 2 sd cards. Which card do I use?
(0) (0) Watch Unwatch
Tim Hoogland –
You should have only received one SD card. Please contact our support for help here: https://contactus.th3dstudio.com
(0) (0)