Tough Extruder – 3:1 Gearing, Bowden OR Direct 1.75mm – Titan Compatible
$39.99
- Geared Extruder
- Based on E3D Titan Open Source Design under GPL V3
- Steel Hobbed Gear
- 1.75mm Bowden Fitting Included FREE
- Thumbscrew for Tension Adjustment Included FREE
- Allen Keys and All Screws Included
- Full parts list below.
- Assembly Video
- Universal ABS Mount Included
- Works with Stock Stepper Motor and stock boards
In stock
Product Info
- Geared Extruder
- Based on E3D Titan Open Source Design under GPL V3
- Engineering & License Files
- Assembles like an E3D Titan Extruder
- Parts List
- 3x Allen Keys for Assembly
- 1x 1.75mm Bowden Adapter – Included FREE (Compare to E3D @ $15+)
- 1x Polycarbonate Lid
- 1x 1.75mm White Filament Guide
- 1x Main Housing (ABS Plastic)
- 1x Universal Mount (ABS Plastic)
- 1x Steel Shaft Gear
- 1x Steel hobbed gear
- 1x Tension arm
- 3x Bearings (2 for hobbed gear, 1 in filament arm)
- 1x PTFE for filament arm
- 1x M4 x 9mm Plastic Covered Metal Thumbscrew – Included FREE (Compare to E3D @ $5)
- 1x M4 x 9mm Screw (For use in place of thumbscrew)
- 1x M3 x 8mm (Screw under fitting)
- 1x M3 x 25mm (Screw for Cover)
- 3x M3 x 30mm (Screws for attaching to motor)
- 3x M3 x 35mm (Screws for attaching to motor, extended)
- Works with Stock Stepper Motor and stock boards
- Firmware update or flipping motor wiring around required
- Supported in the TH3D Unified Firmware Pack
- This is for 1.75mm Filament ONLY
Support/Warranty
- Included Support: TH3D Community Support
- Warranty: 90 Days
Tension Adjustment Note
The included mount is provided by our supplier. We include it since it is provided to us. See below for machine specific mounts.
For firmware enable the Titan Extruder option in the TH3D Unified Firmware.
If you are using your own firmware invert the E direction and we recommend starting with 463 steps/mm and stick with 1/16 stepping on the driver if you have a selectable driver (double the steps/mm if using a 0.9 degree motor, stock printer motors are 1.8 degree).
- CR-10/CR-10S/CR-20/Ender 2/Ender 3/Tornado
- Compact: https://www.thingiverse.com/thing:2274222
- Extended: https://www.thingiverse.com/thing:2474855
- Cable Guide: https://www.thingiverse.com/thing:2690953
- Compact: https://www.thingiverse.com/thing:2274222
This is NOT an E3D product. This is based on their open source design. Compatible with all “Titan” style mounts. Assembles like any Titan Extruder.
James Landfair (verified owner) –
Good tech. Works flawlessly on my CR-10s. Adapted it to my original Bowden extruder mount
(0) (0) Watch Unwatch
Steve (verified owner) –
Had tried many attempts at TPU using stock extruder with nothing but problems. Installed this and first attempt at a full quad canopy turned out perfectly. Best purchase I have made since getting my CR-10s
(0) (0) Watch Unwatch
spudmlgnjr (verified owner) –
It’s a nice upgrade, it will need to be calibrated in firmware after installing. Easy to do.
(0) (0) Watch Unwatch
mjbaldwin0352 (verified owner) –
This product rocks. Across the board it kicks all filaments butts. I have this on my Ender 3 and I am able to push PLA at 215 degrees to 85mm/s and never look back. Right out of the box it delivered great materials and a smooth extrusion while also partnered with the Alfawise Nozzles also from TH3D.
I could not hope for a better extruder for my long term prints.
(0) (0) Watch Unwatch