EZBoard FAQ

Firmware Will Not Flash The most common issue when this happens is a faulty SD card. Get a new MicroSD card from a reputable brand (like Sandisk, Samsung, Kingston, Verbatim) and try that before digging into other issues. Don’t go crazy, just get something in...

Using the EZABL with CR-10S Printers with Touch LCD

The CR-10S with the touch will work with the EZABL however there are a few differences with the setup. Since the touch LCD does NOT support setting the Z offset or Babystepping you cannot do it without a computer. EEPROM: To reset the EEPROM send M502 followed by M500...