Today we just released a SUPER easy tool that calculates the frequencies for your input shaping calibration prints. Just measure the Z height where the best print quality is on your X and Y axis, put that height (in mm) into the calculator and it will instantly give you the frequencies and commands to enter […]
Tag Archives: unified 2
We have working builds for the new Unified 2.60 version. If you want to test it out the files are on the 2.1.x-testing branch on our github repo here: https://github.com/th3dstudio/UnifiedFirmware/tree/2.1.x-testing Input shaping is done 100% on your printer board so there is no complicated multi-board setup like you have to do with Klipper to get […]
Yesterday we pushed out our Unified 2 Firmware 2.41 release. We added DIY firmware as we made for the MKS SGenL V2 boards for the BTT SKR 2 boards. This is the first firmware we’ve put out that has not been tested on an actual board since we do not sell or use these boards. […]
We just launched a new form on our website for reporting any firmware bugs that you may find in our Unified 2 firmware packages. Just fill out the form with your printer information and it will go directly to Tim to review and troubleshoot.
Update (8/1/21) 8PM CST – FIX POSTED If you were having this issue just re-download the firmware from our help center. All firmware has been patched with the new fix. Update (8/1/21) 7PM CST – IDENTIFIED AND FIXED We’re working with someone right now to try and identify the issue. It is looking to be […]