Designed for the Meanwell SE-600-24. We do not carry it but you can get it from major electronics suppliers online. If you purchase from Amazon or Ebay make sure to check the serial # to make sure you get a real one.
You will need 4x M3x8mm screws and 2x M4x8mm screws and Tnuts to mount the PSU to this and the bracket to the printer frame.
Print Settings & Material Recommendations
- Layer Height – 0.2mm-0.3mm
- Material – PLA, PETG, ABS
- Walls – 3x
- Infill – 30%
This is for a DIGITAL DOWNLOAD of the STL file shown in the product pictures above.
How to get your file after purchase
Once your payment clears you will be emailed a link to download the file and if you are logged into your TH3D account it will also show in the "Downloads" section of the "My Account" page. Downloads may be limited to 25 times to prevent account sharing.
License - This is for PERSONAL USE ONLY.
Resale of the file, prints from the file, commercial use, and/or sharing the file online are prohibited. By purchasing this digital download you agree to these terms.
It is up to you to know how to print an STL file.
There is no technical support included on any STL file purchases.
Warranty & Refunds
Due to the nature of digital products, all sales are final.
This is provided AS-IS with no warranty or guarantee from TH3D Studio. All STL files are checked to ensure they are manifold and slice correctly before they are available on our website.
What others are saying
There are no contributions yet.