Do you have a CR-10(S) Series printer with the SKR E3 Mini board and want a stable firmware with the latest features? NOTICE: This firmware is provided AS-IS and is NOT included under the technical support provided with any TH3D products, support is limited to the product itself. The BigTreeTech SKR E3 Mini is not a […]
Do you have a CR-10(S) Series printer with the SKR E3 Mini board and want a stable firmware with the latest features? NOTICE: This firmware is provided AS-IS and is NOT included under the technical support provided with any TH3D products, support is limited to the product itself. The BigTreeTech SKR E3 Mini is not a […]
Most Creality Printers use a FTDI F232R USB to Serial adapter chip for them to use USB. If you have a V1.1.4 board you will want to use the CH340 Driver instead. If you are having issues communicating with your board try installing one of the drivers below. Windows Driver FTDI F232R Windows Driver How to manually install Windows […]
Windows Download the CH340 Driver Run the CH341SER.exe file. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system. (Manufacturer’s Chinese Info Link) Macintosh CH340 for High Sierra (10.13) or Higher […]
Confusing Model Names This guide applies to the “original” CR-10 and CR-10S series machines. This does NOT apply to the CR-10 V2, CR-10 V3, CR-10S Pro, or CR-10 Max. Those printers were all released after the original CR-10/CR-10S models. Why Creality chose to keep the same model numbers is a mystery to us. It is […]
- 1
- 2