What are these?
Stiffen up your printer bed with these solid bed mounts. These replace the stock springs on your bed and are great for when you are using an ABL kit like our EZABL or BL Touch. If you are not sure, then contact us and we can help with the selection. Made from black ABS with an Aluminum insert for maximum stability.
What is Included?
Standard Kit –Â Includes 4 Rounds, 1 Strain Arm (works with most printers with beds 310×310 or smaller), and Zip Ties. If your printer cannot use the strain arm (or has built in strain relief for the bed), then you will use just the 4 rounds.
Camera Kit – Includes everything from the standard kit as well as a camera arm, 2 sets of M3 Screws/Nuts for the Arm, and our Camera Adapter Pack (C270/C310 and EZCam HD)
Camera Arm – Includes JUST a camera arm, 2 sets of M3 Screws/Nuts for the Arm, and our Camera Adapter Pack (C270/C310 and EZCam HD)
Camera Adapters included in the packs are printed in PLA as they do not need to be high-temp resistant. If you need different camera adapters than the 2 included (C270/310 and EZCam HD), you can see all the adapter options we have here: Solid Bed Mount Camera Adapters
Printer Not Listed Below?
Here is how to verify fitment of the kit on your printer. You can also Contact Us and we can try to let you know if the kit will work on your specific printer.
Z Clearance: These kits provide 22mm of height from the Y carriage to your Bed plate. Make sure your stock bed screws are long enough to reach this distance AND make sure that your Z axis can reach the bed when the distance between the Y carriage and the bed itself is at 22mm of distance.
Bed Screw Size: The bed mount kits accept a screw size of M3-M4 size.
Camera Arm Sizing: The length is about 75mm from the back of the arm to the front and it rises up about 115mm for the camera mount portion. Click here for a detailed picture.
Universal Verified Fitment List
This means printers that we have verified that will work with the kit, but not use the strain arm that is included. These will use just the 4 round parts.
- Anet E10
- Anet E12
- Anet E16
- CR-10 S5
- CR-10S S5
- Ender 4
- Ender 6
- Geeetech A10/A10M
- Geeetech A20/A20M
Other Printers: See the “Printer Not Listed Below?” section above for determining if our kit will work with your printer model.
Strain Arm Verified Fitment List
This means printers that we have verified that will work with the kit and use the strain arm that is included.
- CR-10
- CR-10S
- CR-10 S4
- CR-10S S4
- CR-10 V2
- CR-10 V3
- Ender 3
- Ender 3 MAX
- Ender 3 V2
- Ender 5
- Ender 5 Plus
- Ender 3 V2
- Sovol SV01
Other Printers: The strain arm may work with other machines not listed above. The kit includes 4 round parts so if your printer does not work with the strain arm you will use a round instead of the strain arm.
Camera Arm Verified Fitment List
This means printers that we have verified that will work with the kit and the camera arm.
- CR-10
- CR-10S
- CR-10 Mini
- CR-10S Mini
- CR-10 S4
- CR-10S S4
- CR-10 V2
- CR-10 V3
- Ender 3
- Ender 3 MAX
- Ender 3 V2
- Sovol SV01
Other Printers: The camera arm may work with other machines not listed above. If you purchase a camera kit or camera arm for a machine that is not listed, it is up to you to verify fitment on your specific machine.
Warranty Information
3 Months Warranty -Â Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
Bed Strain is modified from Greg191134’s model under the Creative Commons Attribution 3.0 Unported (CC BY 3.0) license:Â https://www.thingiverse.com/thing:2186203
Question
hybotics.wy –
Uh oh. I have an Ender 5 Plus. I just got an EZAble Pro kit to replace the BLTouch. Is this going to work on my printer?
(0) (0) Watch Unwatch
Tim Hoogland –
The standard bed mount kit works on the 5 plus, the camera one does not fit the 5 plus. We do have camera mounts for our EZCam for the 5 PLus that mount on the corner of the printer frame. See our EZCam page for details here: EZCam HD – 1080p, Manual Focus, Wide Angle
(1) (0)
Question
Elliott Benson (verified owner) –
The fingers on my camera mount broke, is there any way for me to print a new one?
(0) (0) Watch Unwatch
Tim Hoogland –
Contact our support and we can get a replacement sent out whether that’s through warranty (depending on how it was broken) or a discounted replacement.
(0) (0)
Question
Jay (verified owner) –
Is there a print that would allow the cable chains to attach to the hotend bed wiring support?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
We do not have a cable chain addon for the solid bed mounts at this time.
(0) (0)
Question
Bryce Pilny (verified owner) –
Just bought the solid mounts for my ender 3 and I have the ABL on as well. but I just set it up and the bed is definitely not level. Am I missing something?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
The solid mounts will not level the bed they just stabilize it. Your ABL sensor will take care of the leveling. If your ABL system is not set up properly then the bed will not be leveled. If you have an EZABL we do have technical support available to go over making sure your setup is correct and you can contact our support team to get help. If you don’t have the EZABL system you should refer to their documentation and contact that seller for assistance with their ABL kit.
(0) (0)
Question
Paul Mayo –
I’m looking to get this for an ender 6 how do these perform with 100c bed temperatures?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
These work fine for 100C bed temps. The Aluminum + ABS design holds up to high temp printing with no issue.
(0) (0)
Question
crandall –
I have a CR10 smart pro. with the silicone mounts work on my printer?
(0) (0) Watch Unwatch
Tim Hoogland (verified owner) –
That’s not a machine we’ve tested but if you want to send some pictures of the bed to our team we can take a look and let you know! You can contact us here: Contact Us
(1) (0)