This article briefly describes how to obtain and use our Unified Firmware packages from our Github source, as well as how to use it to compile your firmware. Please note that you should always be using the latest version of Unified Firmware and the instructions available from our site for your specific model/mainboard for the […]
Before we begin… You should have VSCode, PlatformIO, and Python installed according to these instructions. You can also use Marlin’s instructions for installing the software (up to the “Setting your Environment” section). PlatformIO is an extension of VSCode used for all Marlin-based firmware. It must be installed properly before firmware can be compiled. PlatformIO should […]
Before we begin… A brief explanation of what this is and why you may need it! A bed-leveling probe is designed to take measurements of the topology of a surface, and then adjust the Z height to match during printing. The data taken by the sensor is called a “mesh”, and contains relative measurements of […]
Do you have a Sovol SV03 and want a stable firmware with the latest features? Maybe you’re adding our EZABL kit to the machine. This is the download for you. Directions are below. Download We also recommend you download the Unified 2 STL pack as well. This contains EZABL mounts, Gantry leveling Blocks, Solid bed mounts, and […]
DISCLAIMER This firmware is being put out as a courtesy for people who want to use the EZBoard in their custom printer. Setup and usage of this firmware is *not* covered under the technical support included with the EZBoard. Using the EZBoard in a custom printer is an advanced setup for users who know what […]
- 1
- 2