Unified Firmware Wanhao Duplicator i3 Plus Information

Adding the Unified Firmware to the Wanhao i3 Plus is a little more involved due to the use of its DWIN touch screen display. Fear not! We will go over the steps to install the firmware on the LCD and the board itself in the video below. Once your printer is updated...

EZBoard Installation Guide & Firmware Pack

Firmware Download RECOMMENDED FOR QUICKEST SETUP: If you want to try our web compiler that is in BETA head over to http://ezfirmware.th3dstudio.com Download Latest Firmware (U2.R1.8a) This firmware ONLY supports our EZBoard at this time with the printers listed on the...

P.I.D. Auto Tune Guide

What is P.I.D. Tuning? PID (Proportional Integral Derivative) is the system the printers use for holding a set temperature. This system controls how fast the printer reaches the set temperature and how well it holds that temperature once it gets there. Without it...

Anet Bootloader Flashing Guide (USBASP)

We recommend you use the UNO method to flash your bootloader if you do not already have a USB ASP as the UNO method has been proven to be more reliable. We sell a full bootloader kit in our shop here: TH3D Uno Bootloader Flashing Kit Some Anet boards have an outdated...