Creality Hotend PTFE Heatbreak Replacement

• Direct replacement for your Creality Hotend
• Works with most Creality Printer Models including:
  • Ender 2/3/3 MAX/4/5/5 Plus/6
  • CR-10 (Standard, Mini, S4, S5)
  • CR-10S (Standard, Mini, S4, S5)
• Genuine Creality Replacement Part
• Replaces the stock PTFE Heatbreak
• Heatbreaks are delicate parts.
  • Never tighten your nozzle without holding the heater block with pliers. Doing it without can break the transition zone (the thinnest part).
  • Nozzle crashes can also bend the heatbreak. If your heatbreak is bent in a nozzle crash slowly try to bend it back to the original position.
  • Our warranty does not cover damage to the heatbreak from over-tightening or nozzle crashes, only defects in the product itself.

Heatbreak Assembly Directions

When using any PTFE heatbreak the PTFE tube itself is responsible for creating the seal between the tubing and the nozzle.

Assembling a hotend with a PTFE heatbreak is like an all metal one except you will need to make sure the PTFE tube has pressure on the back of the nozzle to seal correctly.

1. Install the nozzle all the way into the heaterblock
2. Back the nozzle out 1/4 turn from the heaterblock
3. Install the heatbreak into the heaterblock until it hits the back of the nozzle
4. Install the assembled heatbreak+heaterblock+nozzle into your hotend heatsink
5. Unscrew the PTFE fitting from your hotend 1/2 a turn*
6. Make sure your PTFE tube is cut squarely and flat
7. Insert the PTFE tube all the way into the hotend until it stops
8. Tighten the PTFE fitting down all the way
9. Heat the hotend to 240C
10. Tighten the nozzle down with a wrench with the force of 1 finger (do not over tighten)

Part Measurements

• Inner Diameter: 4mm. Allows PTFE to run all the way through to the nozzle.
• Outer Diameter: 7mm (smooth section), 5mm (throat), 6mm (threading)
• Lengths: 16.5mm (smooth section), 5mm (throat), 6mm (threading), 27.5mm (overall)
• Note: Dimensions may vary slightly due to manufacturing tolerances. This does not affect the use of the product.

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $35 per ticket
• Remote Video Call with PC Access: $40 for 30 minutes | $60 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.