Why do you want this upgrade?
Have you ever run out of filament during a print? Now you don’t have to worry! When you get the EZOut board and the filament sensor (add on above) you feed the filament through our sensor and when it runs out the printer will wait for you to load more filament into the printer so you can resume the print! Absolutely ZERO soldering required to install this. Easily add a filament sensor to your compatible 3D printer (see list below) today! This is a full kit that includes all the cables, heatshrink (for the ezout board), and filament sensor.
You will need to update your firmware which is included via download below. This kit connects to the J1 port on your Ender 2 Pro control board.
CPU COMPATIBILITY NOTE (README AND CHECK BEFORE PURCHASING)
Creality has shipped some boards with CPUs that are not real STM32 processors. Please check the CPU on your control board and if it says “STM32” on it’s markings this kit will work with it. If your CPU says “HC32” anywhere in the part number this board is NOT able to use the kit since Creality is illegally withholding firmware from their customers. So if you have an HC32 CPU board the only way to upgrade the firmware to use kits like this one or others on the market you will need to replace it with a board like the V4.2.7 or EZBoard V2 in order to update the firmware to use new addons and even to just upgrade the firmware.
Installation Links
Use our new Unified 2.0 Firmware
Warranty Information
3 Months Warranty -Â Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Technical support is limited to the scope of the product itself and not your entire machine.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.