New

Panchroma™ CoPE Black – 1KG 1.75mm - Image 2

Panchroma™ CoPE Black – 1KG 1.75mm

Name: Panchroma™ CoPE Black – 1KG 1.75mm
Brand: Polymaker
SKU: POLYMAKER_COPE_1KG_BLACK
Availability: InStock

$21.99

Panchroma™ CoPE is a copolyester-based filament engineered for effortless printing and an exceptionally smooth, high-quality surface finish. Its advanced formulation significantly improves bridging and overhang capabilities, enabling reliable, high-speed printing up to 400 mm/s.

Only 4 left in stock

SKU: POLYMAKER_COPE_1KG_BLACK Categories: Polymaker FIlament, CoPE Filament Brand: Polymaker

Description

Superior Bed Adhesion With Important Handling Tips
This material offers outstanding bed adhesion, helping to prevent warping even on challenging prints. However, the adhesion can be so strong that a release agent (such as Magigoo or Vision Miner) is recommended for easier part removal. Avoid using textured PEI build plates without an added adhesive, as adhesion may be excessive. For the easiest release, allow prints to fully cool to room temperature before removal.

Specialized Compatibility
Panchroma™ CoPE does not bond well with standard PLA, making it unsuitable for multi-material prints combining PLA-based Panchroma effects. However, this low adhesion is an advantage when using CoPE as a breakaway support material for PLA, allowing for clean and easy support removal.

Choose Panchroma™ CoPE for projects demanding fast, reliable printing, excellent surface quality, and robust bed adhesion – especially when printing complex geometries or using breakaway supports.

Print Settings

Printing Temperature: 190˚C – 230˚C
Bed Temperature: 25˚C – 60˚C
Printing Speed: up to 400mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

Print Profiles

Can’t find the profile you are looking for? Join our very active Discord where thousands of members may have already made the profile you need.

Printing Requirements

Not recommended to be printed on textured PEI as this material has an extra high bed adhesion properties and can damage the bed. We recommend using Magigoo Original to help with print release if using a textured PEI plate.

A bed temperature of 40–50°C usually ensures good adhesion. For stronger grip, you can increase the temperature slightly—but avoid going above 60°C to prevent over-adhesion.

This will print great on any stock 3D printer and at higher than normal print speeds.

Download Printer Profiles

REACH | RoHS | 889 | PCP | ISO9001 CERT