-
×
Upgraded 8mm Leadscrew Coupler
1 × $4.99
TH3D Bed Cement – 3D Printer Bed Adhesive – Holds Strong, Releases Easy – 100ML Bottle
$19.99
-
This keeps your prints stuck down and releases when cool! Works on ALL bed surfaces and types What makes ours better than the competition?
Bottles shipped after 3/11/2025 now have improved bottles – easier to remove cap and seals.
🍾 MUCH better bottle with built-in EZApply Applicator Tip
⌛ Longer Application Time (dries slightly slower to give you time to apply)
🇺🇸 Made right here by TH3D in the USA (we make this in house)
💸 Stop overpaying for glues! Ours works great and is easy on your wallet.
In stock
Quantity discounts
| Quantity | Discount | Price |
|---|---|---|
| 4-10 | 10% | $17.99 |
| 11-Unlimited | 15% | $16.99 |
Description
Tired of prints popping off the bed or PETG/TPU ruining your build plates? Our new Bed Cement is one of the best 3D printing bed adhesives that keeps your prints stuck during a print and releases them when your bed cools. This is our own recipe that we’ve been working on and now we’re sharing it with you! Almost HALF the price of the leading 3D printing bed adhesives and MUCH easier to use thanks to our EZApply applicator tip thats installed in every bottle. What are you waiting for? Grab a bottle today and get to printing with less stress!
FAQ
What bed types does this work on? This works on all beds including PEI, Flex Plates, Glass, Garolite, and many more.
Glass Bed application tips: When using with glass apply it at 50C or higher and go slowly to let it flow on the glass, otherwise it will form droplets instead of spreading out.
What filaments does this work with? We’ve tested this and it works on PLA, PETG, TPU/TPE, ABS, ASA, Nylons, PC, CF and GF Fills, and Wood Fill.
Do I need heat to use the glue? Yes, our Bed Cement is formulated to be used with bed heat on. 60C for PLA, 80C for PETG, 100C for ABS/ASA – Basically whatever heat your filament maker recommends for their plastic.
How often do I need to re-apply? In most cases you should re-apply the glue every 5-10 prints. Basically, re-apply the glue when adhesion is low. If you are printing in the same spot over and over again you can just touch up just that spot on the bed where you were printing instead of having to do the entire bed. With our EZApply applicator tip, this is super ‘EZ’.
Prints still not sticking? While the adhesive is great it will not compensate for user error of their machine.
- Make sure you have a good 1st layer with it squished on the bed
- If using a printer equipped with auto bed leveling make sure it is calibrated
- Make sure you are heating up the bed
- Slow down your 1st layer speed to improve adhesion
Recommended Bed Temperatures
- ABS/ASA – 100-110C
- PETG/PCTG – 80C
- PLA – 60C
- TPU/TPE – 50C
- Nylons – Refer to manufacturer and select the higher end if there is a range.
Important Information
- This adhesive is Isopropyl Alcohol based so keep it away from open flames and other ignition sources
- We use a water + IPA base to help the adhesive dry quicker than cheaper water-based adhesives. It also helps with dissolution and transfer of the glues in the solution.
- Replace the cap when you are done applying the product to your bed to keep it from drying out
- Bottles have a seal in them – Unscrew the top and remove the seal before use.
- Store bottle upright after using – Bottles can possibly leak if left on their side or upside down for extended periods of time.
- KEEP AWAY FROM CHILDREN – DO NOT DRINK
Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:
- Email Support: $25 per ticket
- Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes
Get help when you need it! Click here to contact us to get paid support.
Reviews (35)
35 reviews for TH3D Bed Cement – 3D Printer Bed Adhesive – Holds Strong, Releases Easy – 100ML Bottle
Add a review
Additional information
| Weight | 6 oz |
|---|---|
| Dimensions | 4 × 1.5 × 1.5 in |
| Made In | 🇺🇸 USA |
| Warranty Length | 6 Months |
Related products
Sale!
(1)
Original price was: $23.99.$10.99Current price is: $10.99.
Out of stock
Sale!
(1)
Original price was: $13.99.$7.99Current price is: $7.99.
cain.scott (verified owner) –
I print allot in ABS and have tried many other bed adhesives and had been disappointed (mainly because I am cheap) and thought that I would forever be relegated to ABS Slurry for my adhesive. The pain in the rear to doing that was the cleaning of the glass. Tim placed it on a discount and I decided to bite the bullet.
It is nice on how easy it lays on the glass and have used the original layer for a couple more prints. Warping is all but eliminated. I don’t see any residue on the black printed parts. Sticks to the part during the entire print and finally releases cleanly (including the brim) upon the bed cooling. Cleaning is so much nicer now. A simple soap and water dose the trick nicely. I tried to clean the bed with alcohol which worked out on a forth print but I really don’t recommend do that.
Would I buy this again? Well, I did and bought 2 more so 1 will be a gift for a friend.
Matthew Cunningham (verified owner) –
I love my aftermarket Bambu Lab X1-Carbon build plates with cool designs like the PEO plates. But some filaments just do not like sticking to it. So I figured I would give this bed cement a try on the PEO build plate….. It prints on it with great adhesion and the printed surface looks as nothing was even applied to the build plate!
Daniel San Pedro (verified owner) –
Awesome bed cement that works exactly as intended. Only thing I wish is that it was maybe a little thicker. A thicker solution would provide better control on where and how it’s applied. Otherwise amazing. Recommend.
Andrew Freese (verified owner) –
I know it makes a difference because when i get lazy about applying it, failures start to happen — and then STOP when i apply!
Applicator is great. Much less of a gooey mess than stick glue.
mark shay (verified owner) –
I have used this glue 3 times, and it has spilt on my floor 3 times. when pulling off the lid the applicator likes to come off also, no twisting required. cleanup is easy with alcohol on cement floor. besides making a mess the glue seems to work well enough.
Rich Magda (verified owner) –
Tim’s Bed Cement works great. It really works as described. Holds the print firmly and easily releases. TPU can be a bugger to release. Just finished doing a batch of TPU prints and the Bed Cement held the prints and easily released them. The TPU came off the bed so easy and clean! Thanks Tim for bringing the community another great product!
woodwaker_dave (verified owner) –
I tried it on some of my build plates that don’t need anything – just to be extra sure. It worked on my Bambu X1C, My Prusa XL, and a Rat Rig. Put it on once and have been printing for days. I will have to check the bottle, I didn’t see the applicator. I took the top off to remove the seal and just poured a little on the plate and spread it around with a small piece of paper towel. I have used Vison Miner and this compares well at a much more affordable price
Ariel (verified owner) –
Libertatum Prints (verified owner) –
Nothing better for the price!
Ken (verified owner) –
Sticks down prints very strong for about 3 prints before it’s worse than using nothing at all. I’ve noticed a similar thing happen with vision miner, but that only lasted one print. The bottle leaks when putting the cap back on and the applicator puts it down heavy. Overall, it’s a good adhesive, and I’ll mainly use it for tricky abs prints.
Ken (verified owner) –
The adhesive provides strong grip for approximately 3-4 prints before needing reapplication. After a certain number of uses, the prints no longer adhere well, which also happens with vision miner. The adhesive does not seem to work well with Polymaker’s Panchroma™ CoPE, as the prints easily lift off the bed. This issue may not be due to the adhesive itself, but rather the specific plastic blend used for CoPE. The bottles aren’t my favorite and leak when putting the cap back on. Sometimes the whole cap comes off instead of just the slide on cover. The cap also cracks if you leave it on too tight.
puffrbelly (verified owner) –
Compared to others I have tried, this stuff is GREAT! It works exactly as described. I will be using TH3D Bed Cement going forward.
Robert Noon (verified owner) –
Great product – I use it all the time. Highly recommend it