- 0.5mm Thick Plate + 0.2mm PEI Coating (per side) – THICKER plate for stronger hold on the bed
- DUAL sided black textured PEI coating
- Plates will NOT rust, New coating is stronger than other PEI plates and our older versions
- Rated up to 140C Bed Temperature
- This is for the PLATE ONLY.
- BambuLab stock magnets work perfect with these plates.
- Includes QR Code on plate for X1 camera
- Bambu A1
- Bambu P1S/P1P
- Bambu X1/X1C
Readme Before Using
- Clean the surface to ensure proper adhesion if not using an adhesive.
- Let plate cool to 40C or lower BEFORE flexing parts off it – Removing parts hot can damage the plate.
- Do NOT print PETG or TPU directly on the plate without some kind of adhesive between the plate and print as it can bond to the PEI. – Use something like our Bed Cement to print these materials without damaging the plate.
- Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
- Make sure to have a proper ZOffset when printing. Our warranty does not cover damage due to improper machine operation and/or calibration.
- Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean.