Specifications
- 0.5mm Thick Plate + 0.2mm PEI Coating (per side) – THICKER plate for stronger hold on the bed
- DUAL sided black textured PEI coating
- Plates will NOT rust, New coating is stronger than other PEI plates and our older versions
- Rated up to 140C Bed Temperature
- This is for the PLATE ONLY. You still need a magnet and we carry them here: EZFlex² – Magnetic Base (140C Max Temp)
- Designed for use with our magnets. SOME stock magnets on low-end printers may NOT work due to them being far weaker than ours.
Compatible Printers
- CR10/CR10S
- Sunlu S8
- Artillery AL-4
- Artillery Sidewinder X1
Readme Before Using
- Clean the surface to ensure proper adhesion if not using an adhesive.
- Let plate cool to 40C or lower BEFORE flexing parts off it – Removing parts hot can damage the plate.
- Do NOT print PETG or TPU directly on the plate without some kind of adhesive between the plate and print as it can bond to the PEI. – Use something like our Bed Cement to print these materials without damaging the plate.
- Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
- Make sure to have a proper ZOffset when printing. Our warranty does not cover damage due to improper machine operation and/or calibration.
- Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean.
Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:
- Email Support: $25 per ticket
- Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes
Get help when you need it! Click here to contact us to get paid support.
Kyle Willcockson (verified owner) –
I changed out from a glass bed to this system. It has been a huge improvement over the glass bed. The bed warms up much quicker. My PLA prints stick without any extra help. I had to use glue on the glass bed frequently. The removal of the print is much faster as well. Remove the flex bed, allow it to cool for a few minutes and give it a bend. The parts pop right off. The glass bed would easily take over 20 min to cool enough for the part to release easily.
This is a great addition to any printer.