300x255mm Dual Sided Black Textured PEI Flex Plate – Sovol SV01/SV01 Pro – EZFlex Pro
$29.99
-
Thicker 0.5mm thick plate vs previous version and other plates.
DUAL sided textured PEI coating for longer life. 1 YEAR warranty coverage.
Missing a size you want? Request it by Contacting Us!
45 in stock
Quantity discounts
| Quantity | Discount | Price |
|---|---|---|
| 4-10 | 10% | $26.99 |
| 11-Unlimited | 15% | $25.49 |
Description
Specifications
- 0.5mm Thick Plate + 0.2mm PEI Coating (per side) – THICKER plate for stronger hold on the bed
- DUAL sided black textured PEI coating
- Plates will NOT rust, New coating is stronger than other PEI plates and our older versions
- Rated up to 140C Bed Temperature
- This is for the PLATE ONLY. You still need a magnet and we carry them here: EZFlex² – Magnetic Base (140C Max Temp)
- Designed for use with our magnets. SOME stock magnets on low-end printers may NOT work due to them being far weaker than ours.
Compatible Printers
- Sovol SV01
- Sovol SV01 Pro
Readme Before Using
- Clean the surface to ensure proper adhesion if not using an adhesive.
- Let plate cool to 40C or lower BEFORE flexing parts off it – Removing parts hot can damage the plate.
- Do NOT print PETG or TPU directly on the plate without some kind of adhesive between the plate and print as it can bond to the PEI. – Use something like our Bed Cement to print these materials without damaging the plate.
- Be sure to select the correct size. TH3D is not responsible if you order the wrong size for your printer bed
- Make sure to have a proper ZOffset when printing. Our warranty does not cover damage due to improper machine operation and/or calibration.
- Do NOT leave liquids on the magnet or place a plate on the magnet if it is not dry and clean.
Reviews (1)
1 review for 300x255mm Dual Sided Black Textured PEI Flex Plate – Sovol SV01/SV01 Pro – EZFlex Pro
Add a review
Additional information
| Weight | 13 oz |
|---|---|
| Dimensions | 12 × 9 × 0.1 in |
| Made In | 🇨🇳 China w/QC in 🇺🇸 USA |
| Warranty Length | 1 Year |
Robert Stewart (verified owner) –
I have both SV01Pro and SV02 which use this size plate. In the past, if I wasn’t using the stock plate, I printed on one of the older gold-colored EZFlex2 plates from TH3D Studio as well. The new black EZFlex Pro plates not only feel sturdier and well made, but also have the added benefit of being dual sided. I find that I need to use a bit of glue stick to ensure 100% adhesion without warping, but I do not consider that a negative since I almost always use glue stick when printing PETG, ABS, or TPU.