Upgraded Leadscrew Coupler – For CR-10/Ender/Tornado/Tarantula/Anet and More

(13 customer reviews)

$4.99

  • Removes Z axis Play
  • EVEN clamping around leadscrew and Motor Shaft
  • Compatible with printers that have 8mm Leadscrew and 5mm Motor Shaft
  • Sold in quantities of one.
  • Guaranteed Compatible with the below printers
    • Alfawise U10
    • CR-10 (All sizes)
    • CR-10S (All sizes)
    • CR-20
    • Tornado
    • Ender 2/3/4/5
    • Anet A8
    • Anet A6
    • Anet E10
    • Anet E12
    • Tronxy X3
    • Tronxy X3S
    • Tronxy X5S

In stock

Purchase this product now and earn 5 Benchies!

Product Info

  • Removes Z axis Play
  • EVEN clamping around leadscrew and Motor Shaft
  • Improves auto bed leveling accuracy
  • Compatible with printers that have 8mm Leadscrew and 5mm Motor Shaft
  • Sold in quantities of one. 
  • Guaranteed Compatible with the below printers
    • Alfawise U10
    • CR-10 (All sizes)
    • CR-10S (All sizes)
    • CR-20
    • Tevo Tarantula Pro
    • Tevo Flash
    • Tevo Tornado
    • Ender 2/3/4/5
    • Anet A8
    • Anet A6
    • Anet E10
    • Anet E12
    • Tronxy X3
    • Tronxy X3S
    • Tronxy X5S

 

Warranty & Support Information

Technical Support: TH3D Community Support

  • To get technical support with this product it is handled through our TH3D Communities
  • Technical support is not included through the TH3D Helpdesk at no charge
    • You are welcome to ask quick questions about a Community Support product through our helpdesk but in-depth 1 on 1 technical support is not included.
  • If you require require a more personalized level of technical support it can be purchased separately in 1 hour blocks of time. Contact Us to get a time-slot paid for and scheduled through one of our technicians.

Warranty Info: 90 Days Warranty

  • Our warranty covers any and all defects with the product.
  • If your product fails or has problems within the warranty period you can contact our support team by emailing Support@TH3DStudio.com or by using the Contact Us link.
    • This is for warranty related issues only, not technical support.
  • Damage/Failure due to improper installation, usage, failure resulting from an issue with the machine the product is installed on, and/or modification or the product is not covered under warranty

 

Best Sellers

Share your thoughts!

5 out of 5 stars

13 reviews

Let us know what you think...

What others are saying

  1. tim.btsi (verified owner)

    Great product at an excellent price point. These couplers are a nice upgrade over those cheap flexible couplers that come on most printers stock.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. ameristar75 (verified owner)

    These things are awesome and reusable. I had just installed one on my CR10 and recently, while lowering the bed, a tool that I had forgotten was interfering with the bed coming down so when the bed struck the tool the Z Coupler did it’s job and came apart to protect the printer. I simply removed the Z Coupler, snapped it back together and reinstalled it and its still being used.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Watchemburn (verified owner)

    Put this on the Z axis of my Tevo Tornado. This thing was a huge improvement with issues I was having where a large ring would appear in the middle of my prints around the whole print. I had tried Pillow block bearings to remove this effect but they did not work. If your gonna do one thing to your Tevo, buy one of these for your Z Axis.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. WFOrider (verified owner)

    Works As Advertised These couplers are a nice upgrade over those cheap flexible couplers that come on most printers and the Nerds the you sent was a bonus thanks TH3D!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. meccquest (verified owner)

    Buy these couplers if you have stock ones. The fact that they can come apart to protect the printer without stretching or breaking like the stock couplers would in the same scenario and be put back together afterwards is enough reason alone to justify getting them.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Z binding gone instantly

    mjbaldwin0352 (verified owner)

    While there are guides all over Youtube on how to adjust or resolve Z binding this component absorbs any inconsistency in the Z rod. This means that like my original Creality Z rod even being 2 degrees bent (I could roll it on the floor and see the wobble) this part corrects that change in real time allowing my prints to be smoother without the need to buy a replacement Z rod. I did in the end replace it but kept this part on due to its reliability.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. mmathosian (verified owner)

    Great upgrade to those cheap flexible couplers. Great price too!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. jeff.buzzell (verified owner)

    I ordered this on a suggestion from a friend in case i had any z-axis issues. I dont know if I needed it but it installed easy and works great.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. Great Price, Great product

    iain.wheeley (verified owner)

    Solved my residual Z slipping and stability issues on my Ender 5. Great item, recommended

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. Question

    Adam Christman

    Work with Ender 5 plus?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • Tor Blazeby (verified owner)

      Yes it will

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. P F (verified owner)

    Very nice little upgrade at an affordable price. When you’re printing all the time, it’s easy to make a stupid mistake (like home your printer with a print still on the bed…) and this little guy will save your hotend, and your self-printed mounts/fans, from damaging themselves but dislodging the entire z rod. And takes just a minute to install.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. A Must upgrade for a bent Screw

    hrsnround34 (verified owner)

    If your Ender 3, or any 3D printer, is like mine your Lead Screw isn’t exactly straight. The original adapter allows no give.

    This one has a little play because of the plastic piece. It has taken the stress off my motor as the Z axis moves. The motor runs cooler and quieter. Also my Lead screw doesn’t seem to wobble as much during rotation.

    A big Plus on this part. Even if you don’t have the issue i had. This will come apart during a bind. Especially if it bottoms out on the bed or a print.

    Big thumbs UP to TH3D for the ingenious thought.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Ken (verified owner)

    Great product with an affordable price. Replaced my stock coupler and my z-axis seems to move smoother now.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. Fixed some issues I had

    besunagel (verified owner)

    Had some minor Z problems, loud sounds when hitting certain positions, after installing these, all those issues went away.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up