TH3D Bambu X1/P1 Upgraded Hotend – Stronger, Replaceable Nozzles, Bi-Metal Heatbreak – Better than “V3” Hotends
$34.99
Replaceable 0.4mm Hardened Steel Nozzle, Bi-Metal Copper Heatbreak, Titanium Heatbreak Mounting Screws. Replace your nozzle in 2 minutes with one hand once this is installed – compare to 15+ minutes with the stock hotend!
Includes new heater, thermistor, silicone sock, 0.4mm nozzle, nozzle wrench, thermal paste, and Allen key. Additional nozzles available here.
These hotends print and function like OEM with the added benefit of swappable nozzles and reinforced heatbreak. Don’t be fooled by the red “v3” hotends on Aliexpress or Amazon that print poorly. These are one of the best Bambu X1/P1 hotends out right now.
Description
🔧 Need Help? – Be sure to read the documentation before using this product!
ASSEMBLY NOTE – DO NOT overtighten the titanium screws. Breakage of the M1.6x6mm titanium screws is NOT covered under warranty and will damage the hotend.
Hotend Assembly stand shown in the assembly video: https://www.printables.com/model/757083-bambu-p1-x1-hotend-station
Assembly Directions
- Assemble the hotend per the video below.
- If your hotend is partially assembled, disassemble it as shown in the video before beginning.
- Once assembled, you can install the hotend like the stock Bambu lab one.
- To change the nozzle heat the hotend up to 240C for 5 minutes, then unscrew the old nozzle, install the new one and gently tighten the new nozzle.
- When unscrewing the nozzle quickly turn the wrench or socket – while a wrench is included we do recommend using a socket (4.0mm Size) if you are new to changing nozzles.
Assembly Video
DIY Pricing: Support Not Included
To keep our part prices as low as possible, this item does not include technical support.
Need help installing or troubleshooting?
We offer paid Priority Email Support and Live Expert Consultations starting at just $35.
Reviews (7)
7 reviews for TH3D Bambu X1/P1 Upgraded Hotend – Stronger, Replaceable Nozzles, Bi-Metal Heatbreak – Better than “V3” Hotends
Add a review
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Printer Model | Bambu X1 Series, Bambu P1 Series |
| Made In | 🇨🇳 China |
| Warranty Length | 6 Months |
Related products
Joel Upshaw (verified owner) –
One of the things I hated about moving to the Bambu printers was the expensive hot ends when you have to swap the whole thing to use different nozzles. This is the perfect solution to quickly swap nozzle sizes instead of complete hot ends.
Daniel McMullen (verified owner) –
This looks to be a great hotend. I just got it installed, have printed about 3 big prints with it so far and the prints have turned out great. I like being able to change nozzles.
Even though i just got this so far it has done great.
Jesse James McGuire (verified owner) –
It’s a pain to switch nozzles on an x1c!!!!!!!! This made it super easy to do saving me time and MONEY!
JJ (verified owner) –
Just got the hot end last week and used it to print.
It came partially assembled and I just needed to put the thermistorheater and fan on it.
Vu Nguyen (verified owner) –
I was told not to modify the P1S because it doesn’t need it. I mostly agree with that statement, except I wanted to change out the nozzle quicker. This hot end from TH3D Studio allowed me to change out the nozzle without removing the whole hot end every time.
Justin (verified owner) –
Replaceable nozzles a plus. Using it on a Voron 2.4 350 with a Jabberwocky toolhead. Got it tuned it, and prints at 22.7 max flow with my settings.