CR-10S Pro V1 V2 Board Adapter Plate – EZBoard, V4.2.7, E3 Free-Runs, SKR E3 Mini – STL Download

Description

This allows you to install our EZBoard V2 and other similar footprint boards (V4.2.7, E3 Free-Runs, or SKR E3 Mini Series) in your CR-10S Pro V1/V2 printer.

Do note that due to the ribbon cable used for the board connections this conversion is a very involved conversion.

Additional Screws Required – 4x M3x8mm screws to bolt new board to the adapter plate (not included but we carry a screw assortment). This adapter plate will fit tightly over the stock standoff posts, force it on to them after ensuring they are aligned with the holes in the adapter plate.

Print Settings & Material Recommendations

• Layer Height – 0.2mm
• Material – PLA, PETG, ABS
• Walls – 3x
• Infill – 30%
• Supports – From Buildplate ONLY

This is for a DIGITAL DOWNLOAD of the STL file shown in the product pictures above.

How to get your file after purchase

Once your payment clears you will be emailed a link to download the file and if you are logged into your TH3D account it will also show in the “Downloads” section of the “My Account” page. Downloads may be limited to 25 times to prevent account sharing.

License – This is for PERSONAL USE ONLY.

Resale of the file, prints from the file, commercial use, and/or sharing the file online are prohibited. By purchasing this digital download you agree to these terms.

Support – It is up to you to know how to print an STL file. There is no technical support included on any STL file purchases.

Warranty & Refunds – Due to the nature of digital products, all sales are final.