Are you having issues with your stock power supply or just want to ditch the clone one these printers usually come with? This is the PSU for you! Guaranteed to fit your Ender 3 Printer. If you have the older PSU that is thicker you will want to either buy or print a new PSU cover. We have them pre-printed and the STL available as well to print on your own.
Tested in on our in-house machines for years! Reduces issues with EZABL and other bed leveling kits due to power ripple and grounding. More reliable than the stock printer PSU.
CHECK POWER SWITCH BEFORE INSTALLING. – SET TO YOUR COUNTRY VOLTAGE (115 for US/Canada – 230 for Most other places)
- Output: 24 VDC @ 350 W 14.6A
- Input Voltage – 100-120VAC, 200-240VAC
NOTE: MeanWell has adjusted the fan tuning curve on newer power supplies. The fan in the power supply now turns on later than previous revisions, generally around 6-8 minutes under full load. This may result in the fan not turning on immediately during printing, but should eventually kick on under sustained load when needed.