Are you having issues with your stock power supply or just want to ditch the clone one these printers usually come with? This is the PSU for you! Guaranteed to fit your Sovol SV06 Plus Printer.
You will want to either buy or print a new PSU cover. We have them pre-printed and the STL available as well to print on your own.
NOTE: The stock PSU on the SV06 Plus is labeled as a “500W” PSU but it is not actually capable of being reliable at that load. The SV06 Plus pulls about 13A (we tested this) at 24V. This PSU can handle 14.6A load so it will be a perfect match for the SV06 Plus.
Tested in on our in-house machines for years! Reduces issues with EZABL and other bed leveling kits due to power ripple and grounding. More reliable than the stock printer PSU.CHECK POWER SWITCH BEFORE INSTALLING. - SET TO YOUR COUNTRY VOLTAGE (115 for US/Canada - 230 for Most other places)
- Output: 24 VDC @ 350 W 14.6A
- Input Voltage - 100-120VAC, 200-240VAC
3 Months Warranty - Our warranty covers any and all defects with the product. If your product fails or has problems within the warranty period you can contact our support team by using the Contact Us link. Technical support is limited to the scope of the product itself and not your entire machine.
Damage/Failure due to improper installation, improper usage, failure resulting from an issue with the machine the product is installed on, 3rd party products connected to our product, and/or modification of the product are not covered under warranty.
What others are saying
There are no contributions yet.