High Thermal Conductivity (>1.114W/M-K)
Temp range: -50C-240C – NOTE: Cold side of the heatbreak where this paste is used does not get nearly as hot as the nozzle.
Weight: 0.3G per Packet – This is for 2 packets of thermal paste
How to use
Before assembling the hotend apply thermal paste to the OUTSIDE of the heatbreak before threading/inserting it into your heatsink.
Wipe away thermal grease that oozes out before fitting the heater block to the heatbreak.
Ken (verified owner) –
I used it in an all-metal hotend with a titanium heatbreak. So far so good.
(0) (0) Watch Unwatch