TH3D Bed Cement – 3D Printer Bed Adhesive – Holds Strong, Releases Easy
$9.99 – $19.99
This keeps your prints stuck down and releases when cool! Works on ALL bed surfaces and types What makes ours better than the competition?
- 🍾 MUCH better bottle with built-in EZApply Applicator Tip
- ⌛ Longer Application Time (dries slightly slower to give you time to apply)
- 🇺🇸 Made right here by TH3D in the USA (we make this in house)
- 💸 30+% Cheaper per ML vs Competitors like Vision Miner Nano Polymer
Tired of prints popping off the bed or PETG/TPU ruining your build plates? Our new Bed Cement is one of the best 3D printing bed adhesives that keeps your prints stuck during a print and releases them when your bed cools. This is our own recipe that we’ve been working on and now we’re sharing it with you! Almost HALF the price of the leading 3D printing bed adhesives and MUCH easier to use thanks to our EZApply applicator tip thats installed in every bottle. What are you waiting for? Grab a bottle today and get to printing with less stress!
FAQ
What bed types does this work on? This works on all beds including PEI, Flex Plates, Glass, Garolite, and many more
What filaments does this work with? We’ve tested this and it works on PLA, PETG, TPU/TPE, ABS, ASA, Nylons, PC, CF and GF Fills, and Wood Fill.
How often do I need to re-apply? In most cases you should re-apply the glue every 10-15 prints. Basically, re-apply the glue when adhesion is low. If you are printing in the same spot over and over again you can just touch up just that spot on the bed where you were printing instead of having to do the entire bed. With our EZApply applicator tip, this is super ‘EZ’.
Important Information
- This adhesive is Isopropyl Alcohol based so keep it away from open flames and other ignition sources
- We use a water + IPA base to help the adhesive dry quicker than cheaper water-based adhesives. It also helps with dissolution and transfer of the glues in the solution.
- Replace the cap when you are done applying the product to your bed to keep it from drying out
- Bottles have a seal in them – Unscrew the top and remove the silver seal before use.
- Store bottle upright after using – Bottles can possibly leak if left on their side or upside down for extended periods of time.
- KEEP AWAY FROM CHILDREN – DO NOT DRINK
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Made In | 🇺🇸 USA |
| Bottle Size | Standard (50ml), Large (100ml) |
| Warranty Length | 6 Months |
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
Related products
I took a chance on this, I have been using regular glue stick on the smooth plate for my K1. It works great!!! Much cleaner than the glue stick, sticks well while printing, and comes off very easily (but not TOO easily) after the bed cools. I highly recommend this and I will be buying more in the future!
Honestly, I took a chance on this. Makes prints stick as well as conventional glue sticks but they release FAR more reliably. Works on glass, PEI & bare stainless steel. Cheaper than alternatives.
Best single use 3D printer adhesive I’ve ever used. It does stick like cemented until it’s cooled down and it’s had time to naturally cool down to room temperature it comes right iff. About the only downside is it doesn’t last for multiple uses like some other brands but this stuff is staying in the drawer for the hard to print/stick filements, I’ll use something cheap for PETG that will last 3 to 5 prints but it won’t stick as near as good either of those 3 to 5 times as it does with this stuff. Cement was the right name for it! Just be careful as it is easy to squeeze to hard and waste a bit even though I thought I barely squeezed the bottle but has a liquid/water like texture unlike a lot of sticky stuff out there granted I didn’t get any on my hands.
Handy addition and way better than glue sticks. No mess and super easy to apply. Awesome!
Well all I can say is it works, I don’t know what’s in it but whatever it is it works great. I have been using the vision miner nano polymer adhesive for years and I was watching the live stream when Tim introduced his version and I figured I would give it a try. I have bought a bunch of things from TH3D and haven’t been disappointed so I figured I would try it even though I still have a full bottle of the vision miner. Well it works great and I do like the sponge top applicator thing for wiping it on the build plate and that an application lasts around 15 to 20 prints so it will last quite a long time. I like the price also :). Tim keep up the good work and innovation on your products.
I ordered this product as soon as Tim made it available, and I have had fantastic results with print plate adhesion. It just works, flat out, without any of the gummy mess generated by some stick adhesives. It also cleans up off the print plate real easy. Little warm water and a micro-fiber towel and you are ready to go again very quickly. I bought two initially, and will buy more when I get close to running out, but it make take awhile, because You don’t have to use very much each time. Bravo Zulu Tim and Company. Nothing but the best.